米6体育平台手机版

ZHCSJ92E October 2009 – September 2022 TS12A12511

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DCN|8
- MPDS099C
DGK|8
- MPDS028E
DRJ|8
- MPDS153B

散热焊盘机械数据 (封装 | 引脚)

DCN|8
- PPTD193B
DRJ|8
- QFND085E

订购信息

6.7 Electrical Characteristics: 5-V Single Supply

V_CC = 5 V ± 10%, -V_CC = 0 V, GND = 0 V, T_A = –40°C to 85°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS	T_A= 25°C			T_A= –40°C to 85°C			UNIT
PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	MIN	TYP	MAX	UNIT
ANALOG SWITCH
	Analog signal range					0		V_CC	V
R_on	ON-state resistance	V_NC =0 V to 4.5 V or V_NO = 0 V to 4.5 V, I_COM = –10 mA; see Figure 7-1		8	10			12.5	Ω
ΔR_on	ON-state resistance match between channels	V_NC =0 V to 4.5 V or V_NO = 0 V to 4.5 V, I_COM = –10 mA		1	1.1			1.5	Ω
R_on(flat)	ON-state resistance flatness	V_NC =0 V to 4.5 V or V_NO = 0 V to 4.5 V, I_COM = –10 mA		1.3			1.3	2	Ω
LEAKAGE CURRENTS
I_NC(OFF), I_NO(OFF)	OFF leakage current	V_NC =0 V to 4.5 V or V_NO = 0 V to 4.5 V, V_COM = 0 V to 4.5 V; see Figure 7-2	–1	±0.5	1	–50		50	nA
I_NC(ON), I_NO(ON)	ON leakage current	V_NC = 0 V to 4.5V or V_NO = 0 V to 4.5 V, V_COM = open; see Figure 7-3	–1	±0.5	1	–50		50	nA
DIGITAL INPUTS
V_INH	High-level input voltage					2.4		V_CC	V
V_INL	Low-level input voltage					0		0.8	V
I_INL, I_INH	Input current	V_IN = V_INL or V_INH		0.01		–0.1		0.1	μA
C_IN	Digital input capacitance			2.8					pF
DYNAMIC⁽¹⁾
t_ON	Turn-ON time	R_L = 300 Ω, C_L = 35 pF, V_COM = 3.3 V; see Figure 7-5		119	145			178	ns
t_OFF	Turn-OFF time	R_L = 300 Ω, C_L = 35 pF, V_COM = 3.3 V; see Figure 7-5		38	47			95.2	ns
t_BBM	Break-before-make time delay	R_L = 300 Ω, C_L = 35 pF, V_NC = V_NO = 3.3 V; see Figure 7-6		79		44			ns
Q_C	Charge injection	V_GEN = V_NC = V_NO = 0 V, R_GEN = 0 Ω, C_L = 1 nF; see Figure 7-7		65					pC
O_ISO	OFF isolation	R_L = 50 Ω, C_L = 5 pF, f = 1 MHz, see Figure 7-8		–70					dB
X_TALK	Channel-to-channel crosstalk	R_L = 50 Ω, C_L = 5 pF, f = 1 MHz, see Figure 7-9		–70					dB
BW	Bandwidth –3 dB	R_L = 50 Ω, see Figure 7-10		152					MHz
THD	Total harmonic distortion	R_L = 600 Ω, C_L = 15 pF, V_NO = 1 VRMS, f = 20 kHz; see Figure 7-11		0.04%
C_NC(OFF), C_NO(OFF)	NC, NO OFF capacitance	f = 1 MHz, see Figure 7-4		15					pF
C_COM(ON), C_NC(ON), I_NO(ON)	COM, NC, NO ON capacitance	f = 1 MHz, see Figure 7-4		55					pF
POWER REQUIREMENTS
I_CC	Positive supply current	V_IN = 0 V or V_CC		0.02				1	μA

(1) Specified by design, not subject to production test.