米6体育平台手机版

ZHCSJI4F July 2006 – March 2015 TS3A4751

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

RUC|14
- MPQF212D
PW|14
- MPDS360
RGY|14
- MPQF114G

散热焊盘机械数据 (封装 | 引脚)

RUC|14
- QFND283A
RGY|14
- QFND039P

订购信息

6.5 Electrical Characteristics for 1.8-V Supply

V_CC = 1.65 V to 1.95 V, T_A = –40°C to 85°C, V_IH = 1 V, V_IL = 0.4 V (unless otherwise noted)⁽¹⁾⁽²⁾

PARAMETER		TEST CONDITIONS		T_A	MIN	TYP⁽³⁾	MAX	UNIT
ANALOG SWITCH
V_COM, V_NO	Analog signal range				0		V_CC	V
R_on	ON-state resistance	V_CC = 1.8 V, I_COM = –10 mA, V_NO = 0.9 V		25°C		1	1.5	Ω
R_on	ON-state resistance	V_CC = 1.8 V, I_COM = –10 mA, V_NO = 0.9 V		Full			2	Ω
ΔR_on	ON-state resistance match between channels⁽⁴⁾	V_CC = 1.8 V, I_COM = –10 mA, V_NO = 0.9 V		25°C		0.09	0.15	Ω
ΔR_on	ON-state resistance match between channels⁽⁴⁾	V_CC = 1.8 V, I_COM = –10 mA, V_NO = 0.9 V		Full			0.25	Ω
R_on(flat)	ON-state resistance flatness⁽⁵⁾	V_CC = 1.8 V, I_COM = –10 mA, 0 ≤ V_NO ≤ V_CC		25°C		0.7	0.9	Ω
R_on(flat)	ON-state resistance flatness⁽⁵⁾	V_CC = 1.8 V, I_COM = –10 mA, 0 ≤ V_NO ≤ V_CC		Full			1.5	Ω
I_NO(OFF)	NO OFF leakage current⁽⁶⁾	V_CC = 1.95 V, V_COM = 0.15 V, 1.65 V, V_NO = 1.8 V, 0.15 V		25°C	–1	0.5	1	nA
I_NO(OFF)	NO OFF leakage current⁽⁶⁾	V_CC = 1.95 V, V_COM = 0.15 V, 1.65 V, V_NO = 1.8 V, 0.15 V		Full	–10		10	nA
I_COM(OFF)	COM OFF leakage current⁽⁶⁾	V_CC = 1.95 V, V_COM = 0.15 V, 1.65 V, V_NO = 1.65 V, 0.15 V		25°C	–1	0.5	1	nA
I_COM(OFF)	COM OFF leakage current⁽⁶⁾			Full	–10		10	nA
I_COM(ON)	COM ON leakage current⁽⁶⁾	V_CC = 1.95 V, V_COM = 0.15 V, 1.65 V, V_NO = 0.15 V, 1.65 V, or floating		25°C	–1	0.01	1	nA
I_COM(ON)	COM ON leakage current⁽⁶⁾			Full	–3		3	nA
DYNAMIC
t_ON	Turn-on time	V_NO = 1.5 V, R_L = 50 Ω, C_L = 35 pF, See Figure 1		25°C		6	18	ns
t_ON	Turn-on time	V_NO = 1.5 V, R_L = 50 Ω, C_L = 35 pF, See Figure 1		Full			20	ns
t_OFF	Turn-off time	V_NO = 1.5 V, R_L = 50 Ω, C_L = 35 pF, See Figure 1		25°C		5	10	ns
t_OFF	Turn-off time	V_NO = 1.5 V, R_L = 50 Ω, C_L = 35 pF, See Figure 1		Full			12	ns
Q_C	Charge injection	V_GEN = 0, R_GEN = 0, C_L = 1 nF, See Figure 5		25°C		3.2		pC
C_NO(OFF)	NO OFF capacitance	f = 1 MHz, See Figure 2		25°C		23		pF
C_COM(OFF)	COM OFF capacitance	f = 1 MHz, See Figure 2		25°C		20		pF
C_COM(ON)	COM ON capacitance	f = 1 MHz, See Figure 2		25°C		43		pF
BW	Bandwidth	R_L = 50 Ω, Switch ON		25°C		123		MHz
O_ISO	OFF isolation⁽⁷⁾	R_L = 50 Ω, C_L = 5 pF, See Figure 3	f = 1 MHz	25°C		–61		dB
O_ISO	OFF isolation⁽⁷⁾	R_L = 50 Ω, C_L = 5 pF, See Figure 3	f = 10 MHz	25°C		–36		dB
X_TALK	Crosstalk	R_L = 50 Ω, C_L = 5 pF, See Figure 3	f = 10 MHz	25°C		–95		dB
X_TALK	Crosstalk	R_L = 50 Ω, C_L = 5 pF, See Figure 3	f = 100 MHz	25°C		–73		dB
THD	Total harmonic distortion	f = 20 Hz to 20 kHz, V_COM = 2 V_P-P	R_L = 32 Ω	25°C		0.14%
THD	Total harmonic distortion	f = 20 Hz to 20 kHz, V_COM = 2 V_P-P	R_L = 600 Ω	25°C		0.013%
DIGITAL CONTROL INPUTS (IN1–IN4)
V_IH	Input logic high			Full	1			V
V_IL	Input logic low			Full			0.4	V
I_IN	Input leakage current	V_I = 0 or V_CC		25°C		0.1	5	nA
I_IN	Input leakage current	V_I = 0 or V_CC		Full	–10		10	nA
SUPPLY
V_CC	Power-supply range				1.6		3.6	V
I_CC	Positive-supply current	V_I = 0 or V_CC		25°C			0.05	μA
I_CC	Positive-supply current	V_I = 0 or V_CC		Full			0.5	μA

(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.

(2) Parts are tested at 85°C and specified by design and correlation over the full temperature range.

(3) Typical values are at T_A = 25°C.

(4) Δr_on = r_on(max) – r_on(min)

(5) Flatness is defined as the difference between the maximum and minimum value of r_on as measured over the specified analog signal ranges.

(6) Leakage parameters are 100% tested at the maximum-rated hot operating temperature and specified by correlation at T_A = 25°C.

(7) OFF isolation = 20_log10 (V_COM/V_NO), V_COM = output, V_NO = input to OFF switch