10 Revision History
Changes from Revision K (July 2024) to Revision L (October 2024)
- 将特性 要点从 RON = 6ω（最大值）更改为 RON = 6Ω（最大值）Go
- 将特性 要点从 δrON = 0.2ω（典型值）更改为 ΔrON = 0.2Ω（典型值）Go
Changes from Revision J (January 2019) to Revision K (July 2024)
- 更新了整个文档中的表格、图和交叉参考的编号格式Go
- 将典型带宽值从1.1GHz 更改为1GHzGo
- Added footnote to the VI/O parameter in the Absolute
Maximum Ratings tableGo
- Changed CDM test conditions in the ESD Ratings table from: per JEDEC
specification JESD22-C101 to: per ANSI/ESDA/JEDEC JS-002Go
- Changed RSE (UQFN) junction-to-ambient thermal resistance value
from: 169.8°C/W to: 204.8°C/WGo
- Changed RSE (UQFN) junction-to-case (top) thermal resistance value
from: 84.7°C/W to: 118.1°C/WGo
- Changed RSE (UQFN) junction-to-board thermal resistance value from:
94.9°C/W to: 121.5°C/WGo
- Changed RSE (UQFN) junction-to-top characterization parameter value
from: 5.7°C/W to: 13.9°C/WGo
- Changed RSE (UQFN) junction-to-board characterization parameter
value from: 94.9°C/W to: 121.2°C/WGo
- Changed the VIK value in the Electrical
Characteristics table from: –1.8V maximum to: –1.8V
minimumGo
- Changed the Typical Characteristics sectionGo
Changes from Revision I (January 2016) to Revision J (January 2019)
- Added CDM value and table notes to the ESD RatingsGo
Changes from Revision H (February 2015) to Revision I (January 2016)
- Changed VIH Max from 5.5 to VCC in Recommended Operating Conditions tableGo
Changes from Revision G (September 2010) to Revision H (February 2015)
- 将“特性”的第一个要点从“VCC 工作电压为 2.5V 和 3.3V”更改为“VCC 工作电压为 2.3V 和 3.6V”Go
- 添加了引脚配置和功能 部分、ESD 等级 表、特性说明 部分、器件功能模式、应用和实施 部分、电源相关建议 部分、布局 部分、器件和文档支持 部分以及机械、封装和可订购信息 部分Go
- 删除了订购信息 表Go