ZHCSAJ9F December 2012 – June 2019 TS3USB3000
PRODUCTION DATA.
The TS3USB3000 has a high impedance mode that places all the signal paths in a Hi-Z state while the device is not in use. To put the device in high impedance mode and disable the switch, the bus-switch enable pin OE must be supplied with a logic High signal as shown in Table 1.
SEL | OE | SWITCH STATUS |
---|---|---|
X | High | Both USB and MHL switches in High-Z |
Low | Low | D+/D– to USB+/USB– |
High | Low | D+/D– to MHL+/MHL– |