米6体育平台手机版

ZHCSX92G December 2008 – October 2024 TS3USB30E

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DGS|10
- MPDS035C
RSW|10
- MPQF206C

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

PARAMETER		TEST CONDITIONS	TYP⁽²⁾	MAX	UNIT
V_IK	Control inputs clamp voltage	V_CC = 3V, I_I = –18mA		–1.2	V
I_IN	Control inputs	V_CC = 4.3V, 0V, V_IN = 0V to 4.3V		±1	μA
I_OZ	D+ and D– OFF-state leakage current⁽³⁾	V_CC = 4.3V, V_O = 0V to 3.6V, V_I = 0V, Switch OFF		±1	μA
I_OFF	Powered off leakage current	V_CC = 0V, V_O = 0V to 4.3V, V_I = 0V, V_IN = V_CC or GND		±2	μA
I_CC	Supply current	V_CC = 4.3V, I_I/O = 0mA, Switch ON or OFF		1	μA
ΔI_CC ⁽⁴⁾	Control inputs	V_CC = 4.3V, V_IN = 2.6V		10	μA
C_in	Control inputs digital input capacitance	V_CC = 0V, V_IN = V_CC or GND	1		pF
C_io(OFF)	OFF-state input capacitance	V_CC = 3.3V, V_I/O = 3.3V or 0V, Switch OFF	2		pF
C_io(ON)	ON-state input capacitance	V_CC = 3.3V, V_I/O = 3.3V or 0V, Switch ON	7.5		pF
R_ON	ON-state resistance⁽⁵⁾	V_CC = 3V, V_I = 0.4V, I_O = –8mA	6	10	Ω
ΔR_ON	ON-state resistance match between channels	V_CC = 3V, V_I = 0.4V, I_O = –8mA	0.35		Ω
r_on(flat)	ON-state resistance flatness	V_CC = 3V, V_I = 0V or 1V, I_O = –8mA	2		Ω

(1) V_IN and I_IN refer to control inputs. V_I, V_O, I_I, and I_O refer to data pins.

(2) All typical values are at V_CC = 3.3V (unless otherwise noted), T_A = 25°C.

(3) For I/O ports, the parameter I_OZ includes the input leakage current.

(4) This is the increase in supply current for each input that is at the specified TTL voltage level, rather than V_CC or GND.

(5) Measured by the voltage drop between the A and B terminals at the indicated current through the switch. ON-state resistance is determined by the lower of the voltages of the two (A or B) terminals.