DATA SHEET
TS5A3159 1-Ω SPDT Analog Switch
1 Features
- Specified Break-Before-Make Switching
- Low ON-State Resistance (1 Ω)
- Control Inputs are 5-V Tolerant
- Low Charge Injection
- Excellent ON-Resistance Matching
- Low Total Harmonic Distortion
- 1.65-V to 5.5-V Single-Supply Operation
- Latch-Up Performance Exceeds 100 mA
Per JESD 78, Class II - ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model
2 Applications
- Mobile Phones
- Consumer and Computing
- Portable Instrumentation
3 Description
The TS5A3159 device is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to 5.5 V. The device offers a low ON-state resistance and an excellent ON-state resistance matching, with the break-before-make feature to prevent signal distortion during the transferring of a signal from one channel to another. The device has excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications.
Device Information(1)
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| TS5A3159 | SOT-23 (6) | 2.90 mm × 1.60 mm |
| SC70 (6) | 2.00 mm × 1.25 mm |
- For all available packages, see the orderable addendum at the end of the data sheet.
Block Diagram
4 Revision History
Changes from C Revision (March 2015) to D Revision
- Changed NO Pin description Go
- Deleted Added Junction temperature to the Absolute Maximum Ratings table.Go
Changes from B Revision (September 2004) to C Revision
- Added Applications, Device Information table, Pin Functions table, ESD Ratings table, Thermal Information table, Typical Characteristics, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section.Go
Changes from A Revision (September 2004) to B Revision
- Removed Ordering Information table.Go
Changes from * Revision (August 2004) to A Revision
5 Pin Configuration and Functions
DBV and DCK Packages
6-Pin SOT-23 and SC-70
Top View
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V+ | Supply voltage(2) | –0.5 | 6.5 | V | |
| VNO
VCOM |
Analog voltage(2)(3)(4) | –0.5 | V+ + 0.5 | V | |
| II/OK | Analog port diode current | VNO, VCOM < 0 or VNO, VCOM > V+ | ±50 | mA | |
| INO
ICOM |
ON-state switch current | VNO, VCOM = 0 to V+ | ±200 | mA | |
| ON-state peak switch current(5) | ±400 | mA | |||
| VIN | Digital input voltage(2)(3) | –0.5 | 6.5 | V | |
| IIK | Digital input clamp current | VIN < 0 | –50 | mA | |
| Continuous current through V+ or GND | ±100 | mA | |||
| Tj | Junction temperature | 150 | °C | ||
| Tstg | Storage temperature | –65 | 150 | °C | |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) Pulse at 1-ms duration < 10% duty cycle.
6.2 ESD Ratings
| VALUE | UNIT | |||
|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | ±2000 | V |
| Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | ±1000 | |||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| VI/O | Switch input/output voltage | 0 | V+ | V |
| V+ | Supply voltage | 1.65 | 5.5 | V |
| VI | Control input voltage | 0 | 5.5 | V |
| TA | Operating temperature | –40 | 85 | °C |
6.4 Thermal Information
| THERMAL METRIC(1) | TS5A3159 | UNIT | ||
|---|---|---|---|---|
| DBV (SOT-23) | DCK (SC-70) | |||
| 6 PINS | 6 PINS | |||
| RθJA | Junction-to-ambient thermal resistance | 165 | 165 | °C/W |
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
6.5 Electrical Characteristics for 5-V Supply
V+ = 4.5 V to 5.5 V and TA = –40°C to 85°C (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP(1) | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC |
Analog signal range | 0 | V+ | V | |||||
| rpeak | Peak ON-state resistance | 0 ≤ VNO or VNC ≤ V+, ICOM = –30 mA, |
Switch ON, see Figure 10 |
25°C | 4.5 V | 1 | 1.5 | Ω | |
| Full | 1.5 | ||||||||
| ron | ON-state resistance | VNO or VNC = 2.5 V, ICOM = –30 mA, |
Switch ON, see Figure 10 |
25°C | 4.5 V | 0.75 | 1.1 | Ω | |
| Full | 1.1 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 2.5 V, ICOM = –30 mA, |
Switch ON, see Figure 10 |
25°C | 4.5 V | 0.1 | Ω | ||
| ron(flat) | ON-state resistance flatness |
0 ≤ VNO or VNC ≤ V+, ICOM = –30 mA |
Switch ON, see Figure 10 |
25°C | 4.5 V | 0.233 | Ω | ||
| VNO or VNC = 1 V, 1.5 V, 2.5 V, ICOM = –30 mA |
25°C | 0.15 | |||||||
| INC(OFF), INO(OFF) |
NC, NO Off leakage current |
VNC or VNO = 4.5 V, VCOM = 0 V, |
Switch OFF, see Figure 11 |
25°C | 5.5 V | –2 | 0.2 | 2 | nA |
| Full | –20 | 20 | |||||||
| INC(ON), INO(ON) |
NC, NO On leakage current |
VNC or VNO = 4.5 V, VCOM = Open, |
Switch ON, see Figure 12 |
25°C | 5.5 V | –4 | 2.8 | 4 | nA |
| Full | –40 | 40 | |||||||
| ICOM(ON) | COM On leakage current |
VNC or VNO = 4.5 V or Open, VCOM = 4.5 V, |
Switch ON, see Figure 12 |
25°C | 5.5 V | –4 | 0.47 | 4 | nA |
| Full | –40 | 40 | |||||||
| Digital Input (IN) | |||||||||
| VIH | Input logic high | Full | 2.4 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | 0.8 | V | ||||
| IIH, IIL | Input leakage current | VIN = 5.5 V or 0 | Full | 5.5 V | –1 | 1 | μA | ||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 4.5 V to 5.5 V |
20 | 35 | ns | |
| Full | 40 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 4.5 V to 5.5 V |
15 | 20 | ns | |
| Full | 35 | ||||||||
| tBBM | Break-before-make time |
VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 4.5 V to 5.5 V |
1 | 12 | 14.5 | ns |
| Full | 1 | ||||||||
| QC | Charge injection | CL = 1 nF, VGEN = 0 V, |
See Figure 19 | 25°C | 5 V | 36 | pC | ||
| CNC(OFF), CNO(OFF) |
NC, NO OFF capacitance |
VNC or VNO = V+ or GND, | Switch OFF, see Figure 13 |
25°C | 5 V | 23 | pF | ||
| CNC(ON), CNO(ON) |
NC, NO ON capacitance |
VNC or VNO = V+ or GND, | Switch ON, see Figure 13 |
25°C | 5 V | 84 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 13 |
25°C | 5 V | 84 | pF | ||
| CIN | Digital input capacitance |
VIN = V+ or GND, | See Figure 13 | 25°C | 5 V | 2.1 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 16 |
25°C | 5 V | 100 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, |
Switch OFF, see Figure 17 |
25°C | 5 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, |
Switch ON, see Figure 18 |
25°C | 5 V | –65 | dB | ||
| THD | Total harmonic distortion |
RL = 600 Ω, CL = 50 pF, |
f = 600 Hz to 20 kHz, see Figure 20 |
25°C | 5 V | 0.01% | |||
| Supply | |||||||||
| I+ | Positive supply current | VIN = V+ or GND, | Switch ON or OFF | Full | 5.5 V | 0.1 | μA | ||
(1) TA = 25°C.
6.6 Electrical Characteristics for 3.3-V Supply
V+ = 3 V to 3.6 V and TA = –40°C to 85°C (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP(1) | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC |
Analog signal range | 0 | V+ | V | |||||
| rpeak | Peak ON-state resistance | 0 ≤ VNO or VNC ≤ V+, ICOM = –24 mA, |
Switch ON, see Figure 10 |
25°C | 3 V | 1.35 | 2.1 | Ω | |
| Full | 2.1 | ||||||||
| ron | ON-state resistance | VNO or VNC = 2 V, ICOM = –24 mA, |
Switch ON, see Figure 10 |
25°C | 3 V | 1.15 | 1.5 | Ω | |
| Full | 1.5 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 2 V, 0.8 V, ICOM = –24 mA, |
Switch ON, see Figure 10 |
25°C | 3 V | 0.11 | Ω | ||
| ron(flat) | ON-state resistance flatness |
0 ≤ VNO or VNC ≤ V+, ICOM = –24 mA, |
Switch ON, see Figure 10 |
25°C | 3 V | 0.225 | Ω | ||
| VNO or VNC = 2 V, 0.8 V, ICOM = –24 mA, |
25°C | 0.25 | |||||||
| INC(OFF), INO(OFF) |
NC, NO Off leakage current |
VNC or VNO = 3 V, VCOM = 0, |
Switch OFF, see Figure 11 |
25°C | 3.6 V | 0.2 | nA | ||
| INC(ON), INO(ON) |
NC, NO On leakage current |
VNC or VNO = 3 V, VCOM = Open, |
Switch ON, see Figure 12 |
25°C | 3.6 V | 2.8 | nA | ||
| ICOM(ON) | COM On leakage current |
VNC or VNO = 3 V or Open, VCOM = 3 V, |
Switch ON, see Figure 12 |
25°C | 3.6 V | 0.47 | nA | ||
| Digital Inputs (IN) | |||||||||
| VIH | Input logic high | Full | 2 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | 0.6 | V | ||||
| IIH, IIL | Input leakage current | VIN = 5.5 V or 0 | Full | 3.6 V | –1 | 1 | µA | ||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 3 V to 3.6 V |
30 | 40 | ns | |
| Full | 55 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 3 V to 3.6 V |
20 | 25 | ns | |
| Full | 40 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 3 V to 3.6 V |
1 | 21 | 29 | ns |
| Full | 1 | ||||||||
| QC | Charge injection | CL = 1 nF, VGEN = 0 V, |
see Figure 19 | 25°C | 3.3 V | 20 | pC | ||
| CNC(OFF), CNO(OFF) |
NC, NO OFF capacitance |
VNC or VNO = V+ or GND, | Switch OFF, see Figure 13 |
25°C | 3.3 V | 23 | pF | ||
| CNC(ON), CNO(ON) |
NC, NO ON capacitance |
VNC or VNO = V+ or GND, | Switch ON, see Figure 13 |
25°C | 3.3 V | 84 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 13 |
25°C | 3.3 V | 84 | pF | ||
| CIN | Digital input capacitance | VIN = V+ or GND, | See Figure 13 | 25°C | 3.3 V | 2.1 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 16 |
25°C | 3.3 V | 100 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, |
Switch OFF, see Figure 17 |
25°C | 3.3 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, |
Switch ON, see Figure 18 |
25°C | 3.3 V | –65 | dB | ||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, |
f = 600 Hz to 20 kHz, see Figure 20 |
25°C | 3.3 V | 0.015% | |||
| Supply | |||||||||
| I+ | Positive supply current | VIN = V+ or GND, | Switch ON or OFF | Full | 3.6 V | 0.1 | μA | ||
6.7 Electrical Characteristics for 2.5-V Supply
V+ = 2.3 V to 2.7 V and TA = –40°C to 85°C (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP(1) | MAX | UNIT | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | ||||||||||
| VCOM, VNO, VNC |
Analog signal range | 0 | V+ | V | ||||||
| rpeak | Peak ON-state resistance | 0 ≤ VNO or VNC ≤ V+, ICOM = –8 mA, |
Switch ON, see Figure 10 |
25°C | 2.5 V | 1.7 | 2.7 | Ω | ||
| Full | 2.7 | |||||||||
| ron | ON-state resistance | VNO or VNC = 1.8 V, ICOM = –8 mA, |
Switch ON, see Figure 10 |
25°C | 2.5 V | 1.45 | 2 | Ω | ||
| Full | 2 | |||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 0.8 V, 1.8 V, ICOM = –8 mA, |
Switch ON, see Figure 10 |
25°C | 2.5 V | 0.7 | Ω | |||
| ron(flat) | ON-state resistance flatness |
0 ≤ VNO or VNC ≤ V+, ICOM = –8 mA, |
Switch ON, see Figure 10 |
25°C | 2.5 V | 0.5 | Ω | |||
| VNO or VNC = 0.8 V, 1.8 V ICOM = –8 mA, |
25°C | 0.45 | ||||||||
| INC(OFF), INO(OFF) |
NC, NO Off leakage current |
VNC or VNO = 2.3 V, VCOM = 0, |
Switch OFF, see Figure 11 |
25°C | 2.7 V | 0.2 | nA | |||
| INC(ON), INO(ON) |
NC, NO On leakage current |
VNC or VNO = 2.3 V, VCOM = Open, |
Switch ON, see Figure 12 |
25°C | 2.7 V | 2.8 | nA | |||
| ICOM(ON) | COM On leakage current |
VNC or VNO = 2.3 V or Open, VCOM = 2.3 V, |
Switch ON, see Figure 12 |
25°C | 2.7 V | 0.47 | nA | |||
| Digital Input (IN) | ||||||||||
| VIH | Input logic high | Full | 1.8 | 5.5 | V | |||||
| VIL | Input logic low | Full | 0 | 0.6 | V | |||||
| IIH, IIL | Input leakage current | VIN = 5.5 V or 0 | Full | 2.7 V | –1 | 1 | μA | |||
| Dynamic | ||||||||||
| tON | Turnon time | VCOM = V+, RL = 50 Ω, | CL = 35 pF, see Figure 14 |
25°C | 2.3 V to 2.7 V |
40 | 55 | ns | ||
| Full | 70 | |||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, | CL = 35 pF, see Figure 14 |
25°C | 2.3 V to 2.7 V |
30 | 40 | ns | ||
| Full | 55 | |||||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 2.3 V to 2.7 V |
1 | 33 | 39 | ns | |
| Full | 1 | |||||||||
| QC | Charge injection | CL = 1 nF, VGEN = 0 V, | See Figure 19 | 25°C | 2.5 V | 13 | pC | |||
| CNC(OFF), CNO(OFF) |
NC, NO OFF capacitance |
VNC or VNO = V+ or GND, | Switch OFF, see Figure 13 |
25°C | 2.5 V | 23 | pF | |||
| CNC(ON), CNO(ON) |
NC, NO ON capacitance |
VNC or VNO = V+ or GND, | Switch ON, see Figure 13 |
25°C | 2.5 V | 84 | pF | |||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 13 |
25°C | 2.5 V | 84 | pF | |||
| CIN | Digital input capacitance | VIN = V+ or GND, | See Figure 13 | 25°C | 2.5 V | 2.1 | pF | |||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 16 |
25°C | 2.5 V | 100 | MHz | |||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, |
Switch OFF, see Figure 17 |
25°C | 2.5 V | –64 | dB | |||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, |
Switch ON, see Figure 18 |
25°C | 2.5 V | –64 | dB | |||
| THD | Total harmonic distortion | RL = 600 Ω, f = 600 Hz to 20 kHz, |
CL = 50 pF, see Figure 20 |
25°C | 2.5 V | 0.025% | ||||
| Supply | ||||||||||
| I+ | Positive supply current | VIN = V+ or GND, | Switch ON or OFF | Full | 2.7 V | 0.1 | µA | |||
6.8 Electrical Characteristics for 1.8-V Supply
V+ = 1.65 V to 1.95 V and TA = –40°C to 85°C (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP(1) | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC |
Analog signal | 0 | V+ | V | |||||
| rpeak | Peak ON-resistance | 0 ≤ VNO or VNC ≤ V+, ICOM = –2 mA, |
Switch ON, see Figure 10 |
25°C | 1.8 V | 4 | 4.9 | Ω | |
| Full | 4.9 | ||||||||
| ron | ON-state resistance | VNO or VNC = 1.5 V, ICOM = –2 mA, |
Switch ON, see Figure 10 |
25°C | 1.8 V | 1.7 | 3.2 | Ω | |
| Full | 3.2 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 0.6 V, 1.5 V, ICOM = –2 mA, |
Switch ON, see Figure 10 |
25°C | 1.8 V | 0.7 | Ω | ||
| Full | 0.7 | ||||||||
| ron(flat) | ON-state resistance flatness |
0 ≤ VNO or VNC ≤ V+, ICOM = –2 mA, |
Switch ON, see Figure 10 |
25°C | 1.8 V | 1.85 | Ω | ||
| Full | 1.85 | ||||||||
| VNO or VNC = 0.6 V, 1.5 V, ICOM = –2 mA, |
25°C | 0.9 | |||||||
| Full | 0.9 | ||||||||
| INC(OFF), INO(OFF) |
NC, NO OFF leakage current |
VNC or VNO = 1.65 V, VCOM = 0, |
Switch OFF, see Figure 11 |
25°C | 1.95 V | 0.2 | nA | ||
| INC(ON), INO(ON) |
NC, NO ON leakage current |
VNC or VNO = 1.65 V, VCOM = Open, |
Switch ON, see Figure 12 |
25°C | 1.95 V | 2.8 | nA | ||
| ICOM(ON) | COM ON leakage current |
VNC or VNO = 1.65 V or open, VCOM = 1.65 V, |
Switch ON, see Figure 12 |
25°C | 1.95 V | 0.47 | nA | ||
| Digital Input (IN) | |||||||||
| VIH | Input logic high | Full | 1.5 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | 0.6 | V | ||||
| IIH, IIL | Input leakage current | VIN = 5.5 V or 0 | Full | 1.95 V | –1 | 1 | μA | ||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 1.65 V to 1.95 V |
65 | 70 | ns | |
| Full | 95 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 1.65 V to 1.95 V |
40 | 55 | ns | |
| Full | 70 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 1.65 V to 1.95 V |
1 | 60 | 72 | ns |
| Full | 0.5 | ||||||||
| QC | Charge injection | CL = 1 nF, VGEN = 0 V, | See Figure 19 | 25°C | 1.8 V | 13 | pC | ||
| CNC(OFF), CNO(OFF) |
NC, NO OFF capacitance |
VNC or VNO = V+ or GND, | Switch OFF, see Figure 13 |
25°C | 1.8 V | 23 | pF | ||
| CNC(ON), CNO(ON) |
NC, NO ON capacitance |
VNC or VNO = V+ or GND, | Switch ON, see Figure 13 |
25°C | 1.8 V | 84 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 13 |
25°C | 1.8 V | 84 | pF | ||
| CIN | Digital input capacitance | VIN = V+ or GND, | See Figure 13 | 25°C | 1.8 V | 2.1 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 16 |
25°C | 5.5 V | 100 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, |
Switch OFF, see Figure 17 |
25°C | 1.8 V | –63 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, |
Switch ON, see Figure 18 |
25°C | 1.8 V | –63 | dB | ||
| Supply | |||||||||
| I+ | Positive supply current | VIN = V+ or GND, | Switch ON or OFF | Full | 1.8 V | 0.1 | µA | ||
6.9 Switching Characteristics for 5-V Supply
over operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 4.5 V to 5.5 V |
20 | 35 | ns | |
| Full | 40 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 4.5 V to 5.5 V |
15 | 20 | ns | |
| Full | 35 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+/2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 4.5 V to 5.5 V |
1 | 12 | 14.5 | ns |
| Full | 1 | ||||||||
6.10 Switching Characteristics for 3.3-V Supply
over operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 3 V to 3.6 V |
30 | 40 | ns | |
| Full | 55 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 3 V to 3.6 V |
20 | 25 | ns | |
| Full | 40 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+/2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 3 V to 3.6 V |
1 | 21 | 29 | ns |
| Full | 1 | ||||||||
6.11 Switching Characteristics for 2.5-V Supply
over operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 2.3 V to 2.7 V |
40 | 55 | ns | |
| Full | 70 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 2.3 V to 2.7 V |
30 | 40 | ns | |
| Full | 55 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+/2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 2.3 V to 2.7 V |
1 | 33 | 39 | ns |
| Full | 1 | ||||||||
6.12 Switching Characteristics for 1.8-V Supply
over operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 1.65 V to 1.95 V |
65 | 70 | ns | |
| Full | 95 | ||||||||
| tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 14 |
25°C | 1.65 V to 1.95 V |
40 | 55 | ns | |
| Full | 70 | ||||||||
| tBBM | Break-before-make time | VNC = VNO = V+/2, RL = 50 Ω, |
CL = 35 pF, see Figure 15 |
25°C | 1.65 V to 1.95 V |
1 | 60 | 72 | ns |
| Full | 1 | ||||||||
6.13 Typical Characteristics
