ZHCSHH3B January 2018 – July 2018 TS5MP645
PRODUCTION DATA.
7 Parameter Measurement Information
Figure 7. On Resistance 
Figure 8. Off Leakage 
Figure 9. On Leakage 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns, tf = 3 ns.
2. CL includes probe and jig capacitance.
Figure 10. tSWITCH timing 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns, tf = 3 ns.
2. CL includes probe and jig capacitance.
Figure 11. tON and tOFF Timing for OE 
Figure 12. Off Isolation 
Figure 13. Crosstalk 
Figure 14. BW and Insertion Loss 
Figure 15. tPD, tSKEW(INTRA) and tSKEW Setup 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100 ps, tf = 100 ps.
2. CL includes probe and jig capacitance.
Figure 16. tPD 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100 ps, tf = 100 ps.
2. CL includes probe and jig capacitance.
Figure 17. tSKEW 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100 ps, tf = 100 ps.
2. CL includes probe and jig capacitance.
3. tSK(INTER) is the max skew between all channels. Diagram exaggerates tSK(INTER) to show measurement technique
Figure 18. tSKEW 
1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns, tf = 3 ns.
2. CL includes probe and jig capacitance.
Figure 19. tBBM