ZHCSMM7A April   2022  – May 2024 TUSB1004

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4.   说明
  5. Pin Configuration and Functions
  6. Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  ESD Ratings
    3. 4.3  Recommended Operating Conditions
    4. 4.4  Thermal Information
    5. 4.5  Power Supply Characteristics
    6. 4.6  Control I/O DC Electrical Characteristics
    7. 4.7  USB Electrical Characteristics
    8. 4.8  Timing Requirements
    9. 4.9  Switching Characteristics
    10. 4.10 Typical Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 4-Level Inputs
      2. 6.3.2 USB Receiver Linear Equalization
        1. 6.3.2.1 Linear EQ Configuration
        2. 6.3.2.2 Full Adaptive Equalization
        3. 6.3.2.3 Fast Adaptive Equalization
      3. 6.3.3 USB Transmitter
        1. 6.3.3.1 Linearity VOD
        2. 6.3.3.2 Limited VOD
        3. 6.3.3.3 Transmit Equalization (Limited Redriver Mode Only)
      4. 6.3.4 USB 3.1 x2 Description
      5. 6.3.5 USB Polarity Inversion
      6. 6.3.6 Receiver Detect Control
    4. 6.4 Device Functional Modes
      1. 6.4.1 MODE Pin
      2. 6.4.2 Rx EQ Configuration in Pin-Strap Mode
      3. 6.4.3 USB 3.2 Power States
      4. 6.4.4 Disabling U1 and U2
    5. 6.5 Programming
      1. 6.5.1 Pseudocode Examples
        1. 6.5.1.1 Fixed EQ with Linear Redriver Mode
        2. 6.5.1.2 Fixed EQ with Limited Redriver Mode
        3. 6.5.1.3 Fast AEQ with Linear Redriver Mode
        4. 6.5.1.4 Fast AEQ with Limited Redriver Mode
        5. 6.5.1.5 Full AEQ with Linear Redriver Mode
        6. 6.5.1.6 Full AEQ with Limited Redriver Mode
      2. 6.5.2 TUSB1004 I2C Address Options
      3. 6.5.3 TUSB1004 I2C Target Behavior
    6. 6.6 Register Map
      1. 6.6.1 TUSB1004 Registers
  9. Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 USB SSTX1/2 Receiver Configuration
        2. 7.2.2.2 USB CRX1/2 Receiver Configuration
          1. 7.2.2.2.1 Fixed Equalization
          2. 7.2.2.2.2 Full Adaptive Equalization
          3. 7.2.2.2.3 Fast Adaptive Equalization
        3. 7.2.2.3 ESD Protection
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  10. Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  11. Revision History
  12. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Typical Characteristics

TUSB1004 USB
                        CRX1 EQ Settings Curves at 85 Ω (from simulation)
Figure 4-1 USB CRX1 EQ Settings Curves
at 85 Ω (from simulation)
TUSB1004 CRX1
                        Input Return Loss Performance at 85 Ω (from simulation)
Figure 4-3 CRX1 Input Return Loss Performance
at 85 Ω (from simulation)
TUSB1004 USB
                            SSRX1 VOD Linearity Settings at 20 MHz and EQ = 0
Figure 4-5 USB SSRX1 VOD Linearity Settings
at 20 MHz and EQ = 0
TUSB1004 USB
                        CTX1 VOD Linearity Settings at 20 MHz and EQ = 0
Figure 4-7 USB CTX1 VOD Linearity Settings
at 20 MHz and EQ = 0
TUSB1004 USB
                            SSTX1 EQ Settings Curves at 85 Ω (from simulation)
Figure 4-2 USB SSTX1 EQ Settings Curves
at 85 Ω (from simulation)
TUSB1004 CTX1
                        Output Return Loss Performance at 85 Ω (from simulation)
Figure 4-4 CTX1 Output Return Loss Performance
at 85 Ω (from simulation)
TUSB1004 USB
                            SSRX1 VOD Linearity Settings at 5 GHz and EQ = 0
Figure 4-6 USB SSRX1 VOD Linearity Settings
at 5 GHz and EQ = 0
TUSB1004 USB
                        CTX1 VOD Linearity Settings at 5 GHz and EQ = 0
Figure 4-8 USB CTX1 VOD Linearity Settings
at 5 GHz and EQ = 0