ZHCSNF8A March 2021 – December 2023 TUSB216I
PRODUCTION DATA
| TUSB211A | TUSB212 | TUSB214 | TUSB216 | TUSB217A | |
|---|---|---|---|---|---|
| Industrial Variant Available | Y | Y | Y | Y | Y |
| Automotive Variant Available | Y | Y | Y | Y | Y |
| Supply (V) | 2.3 to 6.5 | 3.3 | 3.3 | 2.3 to 6.5 | 2.3 to 6.5 |
| DC Boost | Tandem with AC Boost | 3 levels | 3 levels | Tandem with AC Boost | Tandem with AC Boost |
| I2C Control | N | Y | Y | Y | Y |
| RX pre-equalization for ISI compensation | N/A | N/A | N/A | 3 levels | 3 levels |
| Charging Downstream Port (CDP) controller | N/A | N/A | Always ON | Pin Controlled | Always ON. Dynamically selected by DCP/CDP pin |
| Dedicated Charging Port (DCP) controller | N/A | N/A | N/A | N/A | Always ON. Dynamically selected by DCP/CDP pin |
| Cable length compensation for near-end high-speed eye mask Compliance (pre-channel before redriver/post-channel after redriver) (meter - gauge) | 6/3 - 28AWG (10 - 24AWG with one redriver on each end) | 4/2 - 28AWG | 4/2 - 28AWG | 6/3 - 28AWG (10 - 24AWG with one redriver on each end) | 6/3 - 28AWG (10 - 24AWG with one redriver on each end) |
| Cable length compensation for far-end high-speed eye mask Compliance (pre-channel before redriver/post-channel after redriver) (meter - gauge) | 10/8 - 26AWG (10 - 28AWG with one redriver on each end) | 8/6 - 28AWG | 8/6 - 28AWG | 10/8 - 26AWG (10 - 28AWG with one redriver on each end) | 10/8 - 26AWG (10 - 28AWG with one redriver on each end) |