4 修订历史记录
Changes from C Revision (October 2016) to D Revision
-
Changed RVBUS values From: MIN = 891, TYP = 900, MAX = 909 KΩ To: MIN = 855, TYP = 887, MAX = 920 KΩ Go
Changes from B Revision (September 2016) to C Revision
-
Changed text for Pin 7 in the Pin Functions table From: "default current mode detected (H); medium or high current mode detected (L)." To: "Refer to Table 3 for more details."Go
-
Changed text for Pin 8 in the Pin Functions table From: "default or medium current mode detected (H); high current mode detected (L)." To: "Refer to Table 3 for more details."Go
Changes from A Revision (February 2016) to B Revision
-
Changed pins CC1 and CC2 values From: MIN = –0.3 MAX = VDD + 0.3 To: MIN –0.3 MAX = 6 in the Absolute Maximum RatingsGo
Changes from * Revision (August 2015) to A Revision
-
Added Note 1 and 2 to the Pin Functions tableGo
-
Changed the DESCRIPTION of pin EN_N pin in the Pin Functions tableGo
-
Changed the DESCRIPTION of pin EN pin in the Pin Functions tableGo
-
Changed the DESCRIPTION of pin VDD in the Pin Functions tableGo
-
Added Test Condition "See Figure 1" to VBUS_THR in the Electrical Characteristics Go
-
Added Note 2 to the Electrical Characteristics table Go
-
Replaced the Timing Requirements table Go
-
Added Note: "SW must make sure..." to the Description of INTERRUPT_STATUS in Table 9 Go
-
Added text to list item 2 in the TUSB320L Initialization Procedure sectionGo
-
Added text to list item 2 in the TUSB320H Initialization Procedure sectionGo