9 Revision History

Changes from Revision D (March 2017) to Revision E (April 2017)

• 将特性 从“可选择均衡、去加重功能和输出摆幅”更改为“高达 9dB 的可选择均衡、去加重功能和高达 6dB 的输出摆幅”Go
• 删除了特性：“自动 LFPS 去加重控制，符合 USB 3.1 标准”Go
• 将特性 从“可支持 USB DFP、UFP 或 DRP 端口”更改为“支持 USB-C DFP、UFP 或 DRP 端口”Go
• 将应用从“USB Type-C SS 应用”更改为“USB 3.1 Gen 1 SS 应用”Go
• 更改了简化原理图 Go
• Changed the first five paragraphs of the Overview sectionGo
• Changed Figure 7-1 Go
• Changed the Design Requirements and the Detailed Design Procedure section of Typical Applications, USB Type-C Port SS MUX sectionGo
• Changed the Design Requirements and the Detailed Design Procedure section of Typical Application: Switching USB SS Host or Device Ports Go

Changes from Revision C (August 2016) to Revision D (March 2017)

• Added a MIN value of –65 to the Storage temperature in the Absolute Maximum Ratings tableGo

Changes from Revision B (January 2016) to Revision C (August 2016)

• Changed Pin 15 To: TX_AP+ and Pin 14 To: TX_AP- in the RWQ Package imageGo

Changes from Revision A (January 2016) to Revision B (January 2016)

• Changed the RX_AP+ (pin 18) and RX_AP- (pin 17) I/O Type and Description to Diff output Go
• Changed the TX_AP+ (pin 15) and RX_AP- (pin 14) I/O Type and Description to Diff input Go

Changes from Revision * (December 2015) to Revision A (January 2016)

• 更改了简化版原理图 中的 TX_AP 和 RX_AP 引脚Go
• Changed the RX_AP+, RX_AP- and TX_AP+, TX_PA- pins in the RWQ Package imageGo
• Changed pin RX_AP+ number From: 15 To: 18Go
• Changed pin RX_AP- number From: 14 To: 17Go
• Changed pin TX_AP+ number From: 18 To: 15Go
• Changed pin TX_AP- number From: 17 To: 14Go
• Changed Table 6-1 Go
• Changed Figure 6-1 Go
• Changed the Section 6.2 Go
• Changed location of pins SSTXP, SSTXN and SSRXP, SSRXN in Figure 7-2 Go