over operating free-air temperature range (unless otherwise noted)(1) | MIN | MAX | UNIT |
---|
VCCA | Supply voltage | –0.5 | 4.6 | V |
VCCB | Supply voltage | –0.5 | 6.5 |
VI | Input voltage(2) | –0.5 | 6.5 | V |
VO | Voltage applied to any output in the high-impedance or power-off state(2) | –0.5 | 6.5 | V |
VO | Voltage applied to any output in the high or low state(2) (3) | A port | –0.5 | VCCA + 0.5 | V |
B port | –0.5 | VCCB + 0.5 |
IIK | Input clamp current | VI < 0 | | –50 | mA |
IOK | Output clamp current | VO < 0 | | –50 | mA |
IO | Continuous output current | | ±50 | mA |
| Continuous current through VCCA, VCCB, or GND | | ±100 | mA |
TJMAX | Absolute maximum junction temperature | | 150 | °C |
Tstg | Storage temperature | –65 | 150 | °C |
(1) Operation outside the Absolute Maximum Ratings may cause permanent
device damage. Absolute Maximum Ratings do not imply functional operation
of the device at these or any other conditions beyond those listed under
Recommended Operating Conditions. If used outside the Recommended
Operating Conditions but within the Absolute Maximum Ratings, the
device may not be fully functional, and this may affect device reliability,
functionality, performance, and shorten the device lifetime
(2) The input and output negative Voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCCA and VCCB are provided in the recommended operating conditions table.