米6体育平台手机版

ZHCSCI1F November 2013 – October 2024 TXS0104E-Q1

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

RUT|12
PW|14
BQA|14

散热焊盘机械数据 (封装 | 引脚)

BQA|14
- QFND687

订购信息

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
Supply voltage	V_CCA		–0.5	4.6	V
Supply voltage	V_CCB		–0.5	6.5	V
Input-output pin voltage, V_IO ⁽²⁾	A1, A2, A3, A4	A port	–0.5	4.6	V
Input-output pin voltage, V_IO ⁽²⁾	B1, B2, B3, B4	B port	–0.5	6.5	V
Output voltage, V_O	Voltage range applied to any output in the high-impedance or power-off state⁽²⁾	A port	–0.5	4.6	V
		B port	–0.5	6.5	V
	Voltage range applied to any output in the high or low state⁽²⁾ ⁽³⁾	A port	–0.5	V_CCA + 0.5	V
		B port	–0.5	V_CCB + 0.5	V
Input clamp current, I_IK		V_I < 0		–50	mA
Output clamp current, I_OK		V_O < 0		–50	mA
Continuous output current, I_O				±50	mA
Continuous current through each V_CCA, V_CCB, or GND				±100	mA
Storage temperature range, T_stg			–65	150	°C

(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The value of V_CCA and V_CCB are provided in the recommended operating conditions table.