米6体育平台手机版

ZHCSK29B september 2019 – october 2020 UCC23511

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DWY|6

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.10 Switching Characteristics

Unless otherwise noted, all typical values are at T_A = 25°C, V_CC-V_EE= 30 V, V_EE= GND. All min and max specifications are at recommended operating conditions (T_J = -40 to 150°C, I_F(ON)= 7 mA to 16 mA, V_EE= GND, V_CC= 15 V to 30 V, V_F(OFF)= –5V to 0.8V)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_r	Output-signal Rise Time	Cg = 1nF F_SW = 20 kHz, (50% Duty Cycle) VCC=15V			28	ns
t_f	Output-signal Fall Time				25	ns
t_PLH	Propagation Delay, Low to High			70	105	ns
t_PHL	Propagation Delay, High to Low			70	105	ns
t_PWD	Pulse Width Distortion \|t_PHL – t_PLH\|				35	ns
t_sk(pp)	Part-to-Part Skew in Propagation Delay Between any Two Parts⁽¹⁾	Cg = 1nF F_SW = 20 kHz, (50% Duty Cycle) VCC=15V, I_F=10mA			25	ns
t_{UVLO_rec}	UVLO Recovery Delay	V_CCRising from 0V to 15V		20	30	µs
CMTI_H	Common-mode Transient Immunity (Output High)	I_F = 10 mA, V_CM = 1500 V, V_CC= 30 V, T_A= 25°C	150			kV/µs
CMTI_L	Common-mode Transient Immunity (Output Low)	V_F = 0 V, V_CM = 1500 V, V_CC= 30 V, T_A= 25°C	150			kV/µs

(1) t_sk(pp) is the magnitude of the difference in propagation delay times between the output of different devices switching in the same direction while operating at identical supply voltages, temperature, input signals and loads ensured by characterization.