ZHCSTH3D December   2006  – July 2024 UCC27200 , UCC27201

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
    7. 5.7 Timing Diagrams
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Input Stages
      2. 6.3.2 Undervoltage Lockout (UVLO)
      3. 6.3.3 Level Shift
      4. 6.3.4 Boot Diode
      5. 6.3.5 Output Stages
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Input Threshold Type
        2. 7.2.2.2 VDD Bias Supply Voltage
        3. 7.2.2.3 Peak Source and Sink Currents
        4. 7.2.2.4 Propagation Delay
        5. 7.2.2.5 Power Dissipation
      3. 7.2.3 Application Curves
  9. 8 Power Supply Recommendations
  10. 9 Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 第三方米6体育平台手机版_好二三四免责声明
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 接收文档更新通知
    4. 10.4 支持资源
    5. 10.5 Trademarks
    6. 10.6 静电放电警告
    7. 10.7 术语表
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

11 Revision History

Changes from Revision C (April 2016) to Revision D (July 2024)

  • 更改了文档标题以反映器件的主要特性。更新了若干规格以反映器件特性。Go
  • 更新了整个文档中的表格、图和交叉参考的编号格式Go
  • 更改了“特性”部分：1) 将结温范围规格从“-40°C 至 140°C”更改为“-40°C 至 150°C”。2) 将典型传播延迟从“20ns”更改为“22ns”。3) 删除了“工作频率大于 1MHz”，因为开关频率不是指定的参数。4) 将典型自举二极管电阻从“0.6Ω”更改为“0.65Ω”。Go
  • 更新了“应用”部分，添加了 5 大典型应用列表。Go
  • Updated Absolute Maximum Ratings section to remove "Power dissipation at TA = 25°C" and "Lead temperature (soldering, 10s)". Power dissipation can be calculated with thermal metrics in "Thermal Information" table.Go
  • Updated Recommended Operating Conditions: Operating Junction Temperature maximum changed from 140°C to 150°C.Go
  • Updated Thermal Information section to reflect device characteristics. Go
  • Updated Supply Currents specifications in the Electrical Characteristics table: 1) IDD typical changed (From: 0.4mA. To: 0.11mA). 2) IDDO typical changed (From: 2.5mA for UCC27200 and 3.8mA for UCC27201. To: 1mA for both). 3) IDDO maximum changed (From: 4mA for UC27200 and 5.5mA for UCC27201. To: 3mA for both. 4) IHB typical changed (From: 0.4mA. To: 0.065mA). 5) IHBO typical changed (From: 2.5mA. To: 0.9mA). 6) IHBO maximum changed (From: 4mA. To: 3mA). 7) IHBS test condition changed to match VHS maximum recommended operating conditions (From: 110V. To: 105V). 8) IHBSO typical changed (From: 0.1mA. To: 0.03mA).Go
  • Updated Input specifications in the Electrical Characteristics table: 1) UCC27200 VHIT typical changed (From: 5.8V. To: 6V). 2) UCC27200 VLIT typical changed (From: 5.4V. To: 5.6V). 3) UCC27201 VHIT specifications changed (From: 1.7V typical, 2.5V maximum. To: 1.9V minimum, 2.3V typical, 2.7V maximum). 4) UCC27201 VLIT specifications changed (From: 0.8V minimum, 1.6V typical. To: 1.3V minimum, 1.6V typical, 1.9V maximum). 5) UCC27201 VIHYS typical changed (From: 100mV. To: 700mV). 6) UCC27201 RIN specifications changed from (100kΩ minimum, 200kΩ typical, 350kΩ maximum. To: 68kΩ typical). Go
  • Updated Bootstrap diode specifications in the Electrical Characteristics table: 1) RD test conditions changed (From: 100mA and 80mA. To: 120mA and 100mA). 2) RD typical changed (From: 0.6Ω. To: 0.65Ω). Go
  • Updated LO/HO Gate Driver specifications in the Electrical Characteristics table: 1) VLOL typical changed (From 0.18V. To 0.1V). 2) VLOH typical changed (From: 0.25V. To: 0.13V). Go
  • Removed specifications with test conditions "-40°C to 125°C TJ", since all parameters are specified from -40°C to 150°C TJ (unless otherwise noted). Go
  • Changed Propagation Delays typical specification (From: 20ns. To: 22ns).Go
  • Updated Output Rise and Fall Time specifications: 1) tR typical changed (From: 0.35us. To: 0.26us). 2) tF typical changed (From: 0.3us. To: 0.22us). Go
  • Updated all plots in Typical Characteristics section to reflect the device's typical specification. Go
  • Updated Input Stages section. 1) Changed UCC27201A input pulldown resistance typical to match the specification in the electrical characteristics table (From: 70kΩ. To: 68kΩ). 2) Changed input capacitance From: 2pF To: 4pF. 3) Changed UCC27200A input thresholds to 6V and 5.6V to reflect the specification in the electrical characteristics table (From: 48% and 45% of VDD. To: 6V and 5.6V).Go
  • Updated Typical Application section to display a different application diagram and detailed design procedure since information in legacy datasheet had an outdated circuit with obsolete part numbers. Go
  • Changed application curves to display propagation delay and rise/fall time plots. Go
  • Updated Power Supply Recommendations section to fix 3 typos.Go

Changes from Revision B (November 2008) to Revision C (April 2016)

  • 添加了 器件信息 表、 修订历史记录部分、 引脚配置和功能 部分、 规格 部分、 详细说明 部分、 应用和实施 部分、 电源相关建议 部分、 布局 部分、 器件和文档支持 部分 以及机械、封装和可订购信息 部分 Go
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |