米6体育平台手机版

ZHCSN70F November 2002 – November 2023 UCC27423 , UCC27424 , UCC27425

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|8
P|8
DGN|8

散热焊盘机械数据 (封装 | 引脚)

DGN|8
- PPTD041I

订购信息

6.5 Electrical Characteristics

V_DD = 4.5 V to 15 V, T_A = –40°C to 125°C,T_A = T_J, (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
INPUT (INA, INB)
V_{IN_H}	Logic 1 input threshold		1.6	2.2	2.5	V
V_{IN_L}	Logic 0 input threshold		0.8	1.2	1.5	V
	Input current	0 V ≤ V_IN ≤ V_DD	–10	0	10	μA
OUTPUT (OUTA, OUTB)
	Output current	V_DD = 14 V ⁽¹⁾		4		A
R_OH	Output resistance high	I_OUT = –10 mA⁽²⁾		1.2	2.5	Ω
R_OL	Output resistance low	I_OUT = 10 mA		0.7	1.2	Ω
SWITCHING TIME
t_r	Rise time (OUTA, OUTB)	C_LOAD = 1.8 nF		20	40	ns
t_f	Fall time (OUTA, OUTB)	C_LOAD = 1.8 nF		15	40
t_d1	Delay, IN rising (IN to OUT)	C_LOAD = 1.8 nF		25	40
t_d2	Delay, IN falling (IN to OUT)	C_LOAD = 1.8 nF		35	50
ENABLE (ENBA, ENBB)
V_{IN_H}	High-level input voltage	LO to HI transition	1.7	2.4	2.9	V
V_{IN_L}	Low-level input voltage	HI to LO transition	1.1	1.8	2.2	V
	Hysteresis		0.15	0.55	0.90	V
R_ENB	Enable impedance	V_DD = 14 V, ENB = GND	75	100	140	kΩ
t_D3	Propagation delay time (see Figure 6-3)	C_LOAD = 1.8 nF		30	60	ns
t_D4	Propagation delay time (see Figure 6-3)	C_LOAD = 1.8 nF		100	150	ns
OVERALL
I_DD	UCC27423 Static operating current, V_DD = 15 V, ENBA = ENBB = 15 V	INA = 0 V, INB = 0 V		900	1350	μA
		INA = 0 V, INB = HIGH		750	1100
		INA = HIGH, INB = 0 V		750	1100
		INA = HIGH, INB = HIGH		600	900
I_DD	UCC27424 Static operating current, V_DD = 15 V, ENBA = ENBB = 15 V	INA = 0 V, INB = 0 V		300	450	μA
		INA = 0 V, INB = HIGH		750	1100
		INA = HIGH, INB = 0 V		750	1100
		INA = HIGH, INB = HIGH		1200	1800
I_DD	UCC27425 Static operating current, V_DD = 15 V, ENBA = ENBB = 15 V	INA = 0 V, INB = 0 V		600	900	μA
		INA = 0 V, INB = HIGH		1050	1600
		INA = HIGH, INB = 0 V		450	700
		INA = HIGH, INB = HIGH		900	1350
I_DD	All disabled, V_DD = 15 V, ENBA = ENBB = 0 V	INA = 0 V, INB = 0 V		300	450	μA
		INA = 0 V, INB = HIGH		450	700
		INA = HIGH, INB = 0 V		450	700
		INA = HIGH, INB = HIGH		600	900

(1) Parameter not tested in the production

(2) Output pullup resistance in this table is a DC measurement that measures resistance of PMOS structure only (not N-channel structure).