over operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
VVSP |
Power supply voltage |
|
44 |
V |
|
Voltage at SET(2) |
–0.5 |
14 |
V |
|
Voltage at IS(2) |
(VVSP) – 5.5 |
(VVSP) + 0.5 |
V |
|
Voltage at REGS, REGF, VIN, OD,
EF |
–0.5 |
(VVSP) + 0.5 |
V |
|
Voltage at REGF, VG |
–0.5 |
(VVSP) + 0.5 |
V |
|
Current into VG, REGS, REGF, VIN, SET,
EF,and OD pins(2)(3) |
|
±25 |
mA |
|
Current into
IS pin |
–50 |
25 |
mA |
|
Output short-circuit duration(4) |
VG |
Continuous to common and VVSP |
|
REGF |
Continuous to common and VVSP |
TA |
Operating temperature |
–55 |
125 |
°C |
Tstg |
Storage temperature |
–65 |
150 |
°C |
(1) Operation outside the Absolute Maximum Ratings may cause permanent
device damage. Absolute Maximum Ratings do not imply functional operation
of the device at these or any other conditions beyond those listed under
Recommended Operating Conditions. If used outside the Recommended
Operating Conditions but within the Absolute Maximum Ratings, the
device may not be fully functional, and this may affect device reliability,
functionality, performance, and shorten the device lifetime.
(2) Input pins are diode-clamped to the power-supply rails. Current limit input
signals that swing more than 0.5V beyond the supply rails.
(4) See
Section 7.1 regarding safe voltage ranges and currents.