DLPU107 May   2022 DLP5532-Q1

 

  1. 1Abstract
    1.     Trademarks
  2. 1User Guide Overview
    1. 1.1 What is in the DLP5532PROJHBQ1EVM
      1. 1.1.1 Controller PCB
      2. 1.1.2 Illumination Driver PCB
      3. 1.1.3 EVM Cables
    2. 1.2 Specifications
      1. 1.2.1 Electrical Specifications
      2. 1.2.2 Component Temperature Ratings
      3. 1.2.3 Input Video Specifications
      4. 1.2.4 SPI and I2C Timing
  3. 2Quick Start
    1. 2.1 Kit Assembly Instructions
    2. 2.2 Software Installation
    3. 2.3 Powering-Up EVM
    4. 2.4 Connecting EVM to the DLPC230-Q1 Control Program
    5. 2.5 Steps to Reprogram the Onboard Flash Memory
  4. 3Optical Engine Requirements and Specifications

EVM Cables

The DLP5532PROJHBQ1EVM kit contains the cables and FTDI USB to SPI/I2C adapter listed in Table 1-6.

Table 1-6 EVM Cables
Name Reference Quantity
Micro HDMI Cable A 1
Input Power Cable B 1
Host SPI Cable C 1
FTDI SPI Host Adapter D 1
Host I2C Cable
(Includes PROJ_ON, HOLD_BOOT, HOST_IRQ signals)
E 1
GUID-CCE8E0CE-4CA6-412E-BB7F-96C8FC1D5551-low.jpg Figure 1-4 EVM Cables