米6体育平台手机版

DLPU115 January 2022 DLPC3421

1
2
1. 3
2. 4
  1. 5
  2. 6
  3. 7
8
1. 9
2. 10
11
1. 12
  1. 13
    1. 14
    2. 15
  2. 16
    1. 17
    2. 18
    3. 19
  3. 20
    1. 21
    2. 22
  4. 23
    1. 24
    2. 25
    3. 26
  5. 27
    1. 28
    2. 29
  6. 30
    1. 31
    2. 32
    3. 33
  7. 34
    1. 35
    2. 36
  8. 37
    1. 38
    2. 39
    3. 40
  9. 41
    1. 42
    2. 43
  10. 44
    1. 45
    2. 46
    3. 47
  11. 48
    1. 49
    2. 50
  12. 51
    1. 52
    2. 53
    3. 54
  13. 55
    1. 56
    2. 57
    3. 58
  14. 59
    1. 60
    2. 61
  15. 62
    1. 63
    2. 64
    3. 65
  16. 66
    1. 67
    2. 68
  17. 69
    1. 70
    2. 71
    3. 72
  18. 73
    1. 74
    2. 75
  19. 76
    1. 77
    2. 78
    3. 79
  20. 80
    1. 81
    2. 82
    3. 83
  21. 84
    1. 85
    2. 86
    3. 87
  22. 88
    1. 89
    2. 90
  23. 91
    1. 92
    2. 93
    3. 94
  24. 95
    1. 96
    2. 97
    3. 98
  25. 99
    1. 100
    2. 101
  26. 102
    1. 103
    2. 104
    3. 105
  27. 106
    1. 107
    2. 108
  28. 109
    1. 110
    2. 111
    3. 112
  29. 113
    1. 114
    2. 115
  30. 116
    1. 117
    2. 118
  31. 119
    1. 120
    2. 121
    3. 122
  32. 123
    1. 124
    2. 125
2. 126
  1. 127
    1. 128
    2. 129
  2. 130
    1. 131
    2. 132
    3. 133
  3. 134
    1. 135
    2. 136
  4. 137
    1. 138
    2. 139
    3. 140
  5. 141
    1. 142
    2. 143
  6. 144
    1. 145
    2. 146
    3. 147
  7. 148
    1. 149
    2. 150
    3. 151
  8. 152
    1. 153
    2. 154
  9. 155
    1. 156
    2. 157
    3. 158
  10. 159
    1. 160
    2. 161
    3. 162
3. 163
  1. 164
    1. 165
    2. 166
  2. 167
    1. 168
    2. 169
    3. 170
  3. 171
    1. 172
    2. 173
  4. 174
    1. 175
    2. 176
    3. 177
  5. 178
    1. 179
    2. 180
  6. 181
    1. 182
    2. 183
    3. 184
  7. 185
    1. 186
    2. 187
  8. 188
    1. 189
    2. 190
    3. 191
4. 192
  1. 193
    1. 194
    2. 195
  2. 196
    1. 197
    2. 198
    3. 199
  3. 200
    1. 201
    2. 202
  4. 203
    1. 204
    2. 205
    3. 206
  5. 207
    1. 208
    2. 209
  6. 210
    1. 211
    2. 212
    3. 213
  7. 214
    1. 215
    2. 216
  8. 217
    1. 218
    2. 219
    3. 220
5. 221
  1. 222
    1. 223
    2. 224
    3. 225
  2. 226
    1. 227
    2. 228
    3. 229
  3. 230
    1. 231
    2. 232
    3. 233
  4. 234
    1. 235
    2. 236
    3. 237
  5. 238
    1. 239
    2. 240
    3. 241
  6. 242
    1. 243
    2. 244
    3. 245
  7. 246
    1. 247
    2. 248
    3. 249

3.5.2.3 Return Parameters

Table 3-46 describes the return parameters.

Table 3-46 Return Parameters

Parameter Bytes	Description
Byte 1	DMD interface status
Byte 2	LED status
Byte 3	Internal interrupt status
Byte 4	Misc. status

All system status error bits are cleared when the read system status is read.

Figure 3-68 Byte 1 Return Parameters

MSB	Byte 1 – DMD Interface Status						LSB
b7	b6	b5	b4	b3	b2	b1	b0

b(7:3)	Reserved
b(2)	DMD training error: 0: No error 1: Error
b(1)	DMD interface error: 0: No error 1: Error
b(0)	DMD device error: 0: No error 1: Error

The system sets the DMD device error for the following conditions:

The system cannot read the DMD device ID from the DMD.
The system-specified DMD device ID does not match the actual DMD device ID.

The system sets the DMD interface error when there are power management setup conflicts on this interface.

The system sets the DMD training error when the training algorithm cannot find a data eye that meets the specified requirements. For controller pins selected for training, DMD training will fail if less than 20 out of 50 continuous response values pass.

Figure 3-69 Byte 2 Return Parameters

MSB	Byte 1 – LED Status						LSB
b7	b6	b5	b4	b3	b2	b1	b0

b(7:6)	Reserved
b(5)	Blue LED error: 0: No error 1: Error
b(4)	Green LED error: 0: No error 1: Error
b(3)	Red LED error: 0: No error 1: Error
b(2)	Blue LED state: 0: Off 1: On
b(1)	Green LED state: 0: Off 1: On
b(0)	Red LED state: 0: Off 1: On

Figure 3-70 Byte 3 Return Parameters

MSB	Byte 1 – Internal Interrupt Status						LSB
b7	b6	b5	b4	b3	b2	b1	b0

b(7:2)	Reserved
b(1)	Sequence error: 0: No error 1: Error
b(0)	Sequence abort error: 0: No error 1: Error

Figure 3-71 Byte 4 Return Parameters

MSB	Byte 1 – Misc. Status						LSB
b7	b6	b5	b4	b3	b2	b1	b0

b(7)	Input frame rate error: 0: No error 1: Error
b(6)	Input source resolution error: 0: No error 1: Error
b(5)	Watchdog timer timeout: 0: No timeout 1: Timeout
b(4)	Product configuration error: 0: No error 1: Error
b(3)	Leader versus follower operation: 0: Leader 1: Follower
b(2)	Single versus dual controller configuration: 0: Single 1: Dual
b(1:0)	Reserved

The system sets the product configuration error bit if it determines that some piece of the product configuration is not correct. Some examples are:

Invalid controller or DMD combination
Invalid controller or DLPA200x combination
Invalid flash build for the current controller, DMD, or DLPA200x configuration

The system sets the watchdog timer timeout bit if the system has been reset due to a watchdog timer timeout. The system sets the input frame rate error if the input frame rate is not supported according to Table 3-47. The system sets the input source resolution error if the input resolution is not supported.

Table 3-47 Supported Frame Rates

Controller	Supported Frame Rate Range
DLPC3421	47 - 360 Hz
DLPC3420	47 - 60 Hz