米6体育平台手机版

SBAU213A September 2013 – July 2020 ADS8860

Trademarks
1EVM Overview
1. 1.1 ADS8860EVM Kit
2. 1.2 ADS8860EVM Board
2EVM Analog Interface
1. 2.1 ADC Drive Amplifier and Filter
2. 2.2 Reference Drive
3Digital Interface
1. 3.1 Serial Interface (SPI)
2. 3.2 I2C Bus for the Onboard EEPROM
4Power Supplies
5ADS8860EVM Initial Setup
1. 5.1 Software Installation
6EVM Operation
7Bill of Materials, Schematics, and Layout
8Reference
9Revision History

7.2 Board Layouts

Figure 7-1 and Figure 7-2 show the PCB layouts for the ADS8860EVM.

Note:

Board layouts are not to scale. These figures are intended to show how the board is laid out; they are not intended to be used for manufacturing ADS8860EVM PCBs.

Figure 7-1 ADS8860EVM PCB: Ground Layer

Figure 7-2 ADS8860EVM PCB: Bottom Layer (GND)