The ADS8860EVM board includes:
- An external single-ended
signal source applied to the SMA connector.
- The amplifier driver and
voltage reference circuit can be used as a
reference design. These components are optimized
to meet the ADS8860 data sheet
performance at 1 MSPS.
- The serial interface connects
to the PHI controller via a 60-pin connector
(J2).
- Test-point connection monitor
digital signals with a logic analyzer.
- An onboard ultra-low noise
low-dropout (LDO) regulator provides an excellent
3.3-V and 5.3-V voltage range.
- The REF6050 precision 5-V
voltage reference is optimized for the SAR ADC
VREF input.