9.2.1.1 Channel Selection

The Channel Selection checkboxes are automatically populated based on the available channels from the device under evaluation. They are labeled according to the functionality and index of the channel within the data set. By checking the checkbox, the corresponding dataset is loaded for display and analysis. Multiple channels can be viewed simultaneously or independently, depending on your needs. By default, the first channel is always displayed when you collect data for the first time. Subsequent data collections maintain the channel selection as long as the channel arrays and channel parameters (datarate, gain, and so forth) are not changed via registers or hardware settings. If register changes or hardware settings are made that influence the mentioned items, the channel selection array is cleared and the first item in the array is shown by default.