- On ADC3660EVM, shunt J14 (2-3) to use
USB power.
- Connect ADC sampling clock source (SMA100A used) to J8. Set signal power to +15 dBm.
65 MSPS used in this example.
- Connect DCLKIN clock source (SMA100A used) to J10. Set signal power to +13 dBm.
16.25 MHz used in this example
Attention:
ADC sampling clock source and DCLKIN
source must be frequency locked. If this is not performed, the captured data is not
recognizable.
- Connect Analog input source (SMA100A
used) to J2 for CHA. 1 MHz used in this example (with bandpass filter).
- Connect Mini-USB cable from PC to J15
on ADC3660EVM.
- Push button S1 to reset ADC
- lRun the ADC35xx GUIi