1 Overview

This document contains information for TPS745-Q1 (DRV and DRBpackages) to aid in a functional safety system design. Information provided are:

• Functional Safety Failure In Time (FIT) rates of the semiconductor component estimated by the application of industry reliability standards
• Component failure modes and their distribution (FMD) based on the primary function of the device
• Pin failure mode analysis (Pin FMA)

Figure 1-1 shows the Adjustable Version With Open-Drain Power-Good functional block diagram for reference.

Figure 1-2 shows the Adjustable Version With Push-Pull Power-Good functional block diagram for reference.

Figure 1-3 shows the Fixed Voltage Version With Open-Drain Power-Good functional block diagram for reference.

Figure 1-4 shows the Fixed Voltage Version With Push-Pull Power-Good functional block diagram for reference.

Figure 1-1 Adjustable Version With Open-Drain Power-Good

Figure 1-2 Adjustable Version With Push-Pull Power-Good

Figure 1-3 Fixed Voltage Version With Open-Drain Power-Good

Figure 1-4 Fixed Voltage Version With Push-Pull Power-Good

TPS745-Q1 was developed using a quality-managed development process, but was not developed in accordance with the IEC 61508 or ISO 26262 standards.