米6体育平台手机版

SCDS445D May 2022 – September 2024

PRODUCTION DATA

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽³⁾

		MIN	MAX	UNIT
V_DD– V_SS	Supply voltage		28	V
V_DD		–0.5	28	V
V_SS		–28	0.5	V
V_SEL or V_EN	Logic control input pin voltage (EN, Ax, SELx)	–0.5	28	V
I_SEL or I_EN	Logic control input pin current (EN, Ax, SELx)	–0.5	28	mA
V_S or V_D	Source or drain voltage (Sx, D)	V_SS–0.5	V_DD+0.5	V
I_IK	Diode clamp current⁽²⁾	–30	30	mA
I_S or I_{D (CONT)}	Source or drain continuous current (Sx, D)	–10	10	mA
T_J	Junction temperature		150	°C
T_stg	Storage temperature	–65	150	°C

(1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute maximum ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If briefly operating outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not sustain damage, but it may not be fully functional. Operating the device in this manner may affect device reliability, functionality, performance, and shorten the device lifetime.

(2) Pins are diode-clamped to the power-supply rails. Over voltage signals must be voltage and current limited to maximum ratings.

(3) To avoid drawing excess current from V_DD, or into V_SS, the voltage drop across the bidirectional switch path (ΔV_switch) must not exceed 1.2V (600mV for high temperature).