1 Overview

This document contains information for DRV8244-Q1 to aid in a functional safety system design. This document covers all the device package and interface variants as listed below:

1. HW variant in HVSSOP package
2. SPI "S" variant in HVSSOP package
3. SPI "P" variant in HVSSOP package
4. HW variant in VQFN-HR package
5. SPI "S" variant in VQFN-HR package

Information provided are:

• Functional Safety Failure In Time (FIT) rates of the semiconductor component estimated by the application of industry reliability standards
• Component failure modes and their distribution (FMD) based on the primary function of the device
• Pin failure mode analysis (Pin FMA) for all the package and interface variants

Figure 1-1 shows the HW device variant's functional block diagram for reference.

Figure 1-2 shows the SPI "S" device variant's functional block diagram for reference.

Figure 1-3 shows the SPI "P" device variant's functional block diagram for reference.

DRV8244-Q1 was developed using a quality-managed development process, but was not developed in accordance with the IEC 61508 or ISO 26262 standards.

ADVANCE INFORMATION for preproduction products; subject to change without notice.