米6体育平台手机版

SLAA842B December 2018 – August 2019 DS90C401 , DS90C402 , MSP430FR2512 , MSP430FR2522 , MSP430FR2532 , MSP430FR2533 , MSP430FR2632 , MSP430FR2633 , MSP430FR2672 , MSP430FR2673 , MSP430FR2675 , MSP430FR2676

1
1. 2
2. 3
  1. 4
3. 5
4. 6
5. 7
6. 8
  1. 9
    1. 10
    2. 11
  2. 12
7. 13
8. 14
9. 15
10. 16
11. 17
12. 18
19

10 Step 8: Mass Production

The final step of designing a successful capacitive touch sensing system is to prepare for mass production.

Table 17 is a mass production check list.

Table 17. Mass Production Check List

No.	Items	Recommendations
1	Production Test Plan	Work with your manufacturer on the production test plan and specifically on capacitive touch performance pass criteria.
2	Production Firmware	Remove the development software.

1. Production Test Plan

TI strongly recommends that you work closely with your manufacturer on the production test plan. Make sure that the production line process is consistent on all units to ensure reliable performance.
The capacitive touch production test plan includes capacitive touch test fixtures and system pass/fail criteria.

2. Production Firmware

Remove all the development software like CapTIvate Design Center communication interface code. Add production-line system diagnostic code, if necessary.