SLAAE65 October 2022 DS160PR412 , DS160PR421 , TMUXHS4412
3.1 Test Board Configuration
The HSDC092 evaluation module is used for the PCI Express 4.0 compliance test. The module features two DS160PR412 and two DS160PR421 linear redrivers that can extend the transmission distance of a PCIe Gen 4 8 × bus. The EVM can be directly plugged into a PCIe slot on a server or PC motherboard using the PCIe edge connector on the board and paired with a PCIe add-in card using one of the two PCIe connectors on the EVM.
Figure 3-1 HSDC092 Evaluation ModuleTable 3-1 lists the board configuration for PCI Express 4.0 CBB, AIC compliance test.
Table 3-1 PCI Express 4.0 Compliance Test Configuration
| SHNT# | Header | MUX SHNT# | 412 or 421 SHNT# |
|---|---|---|---|
| 1 | JMP7 | 1–2 | 1-2 |
| 2 | JMP8 | 2–3 | 2-3 |
| 3 | JMP1 | float | 1-2,7-8,13-14 |
| 4 | JMP2 | float | 1-2,7-8,13-14 |
| 5 | JMP3 | float | float |
| 6 | JMP4 | float | float |
| 7 | JMP5 | float | float |
| 8 | JMP18 | float | 2-3 |
| 9 | JMP19 | float | 2-3 |
| 10 | JMP20 | float | 2-3 |
| 11 | JMP11 | float | 1-2,7-8,13-14 |
| 12 | JMP14 | float | 1-2,7-8,13-14 |
| 13 | JMP17 | float | 1-2,3-4,5-6 |