米6体育平台手机版

SLAU358Q September 2011 – October 2019

4.2.36 MSPGANG_SetTmpGANG_Config

See the Set temporary configuration command (Section 3.5.3.3) for details.

Syntax

LONG MSPGANG_SetTmpGANG_Config(LONG no, LONG data)

Arguments

LONG no	Index list of indexes below
LONG data

Result

LONG	Error code


//----- TMP_CFG_INDEX and data --------
#define   CFG_TMP_CLEAR         2
		//data  - none

#define   CFG_TMP_TASK_MASK     4
			//---  task mask bits ---- - for all tasks - set 0xFFFF
			#define	CONNECT_TASK_BIT     0x0001
			#define	ERASE_TASK_BIT       0x0002
			#define	BLANKCHECK_TASK_BIT  0x0004
			#define	PROGRAM_TASK_BIT     0x0008
			#define	VERIFY_TASK_BIT   	 0x0010
			#define	SECURE_TASK_BIT      0x0020
			#define	DCO_CAL_TASK_BIT     0x0040
			//spare              		0x0080 to 0x4000
			#define	RST_AND_START_FW_BIT 0x8000

#define   CFG_TMP_VCC_VALUE     6
			// Vcc in mV - 1800 ...3600

#define   CFG_TMP_POWER_VCC_EN  8
			//	disable		0
			//	enable		1

#define   CFG_TMP_INTERFACE     10
			// (INTERFACE_JTAG  |  INTERFACE_FAST)
			// (INTERFACE_JTAG  |  INTERFACE_MED)
			// (INTERFACE_JTAG  |  INTERFACE_SLOW)
			// (INTERFACE_SBW  |  INTERFACE_FAST)
			// (INTERFACE_SBW  |  INTERFACE_MED)
			// (INTERFACE_SBW  |  INTERFACE_SLOW)

#define   CFG_TMP_GANG_MASK     12
			//	Targets GANG enable mask - 0x00 ...0xFF. Enable all targets -> 0xFF
			//	TARGET_1_MASK		0x01
			//	TARGET_2_MASK		0x02
			//	TARGET_3_MASK		0x04
			//	TARGET_4_MASK		0x08
			//	TARGET_5_MASK		0x10
			//	TARGET_6_MASK		0x20
			//	TARGET_7_MASK		0x40
			//	TARGET_8_MASK		0x80

#define   CFG_TMP_VCC_ONOFF     14
			//	disable		0
			//	enable		1

#define   CFG_LCD_CONTRAST      16
			//	0x00 --0x3F

#define   CFG_TMP_ICC_HI_EN     18
			//	disable		0
			//	enable		1

#define   CFG_TMP_IO_INTERFACE  20
			//  0  -  SBW_VIA_TDOI  (pin 1)  and TCK/TEST (pin-7/8)
			//  1  -  SBW_VIA_RST   (pin 11) and TCK/TEST (pin-7/8)

#define   CFG_TMP_RESET			22	
			//	disable		0
			//	enable		1

#define   CFG_TMP_KEYBOARD_EN   24
			//	disable		0
			//	enable		1

#define   CFG_TMP_VCC_SETTLE_TIME  26
			// 0...200  Vcc settle time in 20 ms increment (t = 0...4000 ms)

#define   CFG_TMP_CUMULATIVE_ST_EN  28
            // 0   - disable 
            // 1   - enable     ( default )     
#define   CFG_WRAPPER_MASK			30
			// used in the DLL wrapper of the MSP-GANG430 only. Do not use it.
#define   CFG_WRAPPER_EN_KEY		32
			// used in the DLL wrapper of the MSP-GANG430 only. Do not use it.
#define   CFG_WRAPPER_GANG_MASK		34
			// used in the DLL wrapper of the MSP-GANG430 only. Do not use it.
#define   CFG_TMP_BSL_1ST_PASSW		36	
			//	#define		BSL_ANY_PASSW						0
			//	#define		BSL_PASSW_FROM_CODE_FILE			1
			//	#define		BSL_PASSW_FROM_PASSWORD_FILE		2
			//	#define		BSL_EMPTY_PASSW						3

#define   CFG_DISABLE_TASK_MASK		38