SLAU358Q September 2011 – October 2019
Click the Read button in the Main Dialog GUI to read the contents of the target MCU's flash memory. Use the Memory Options configuration screen shown in Figure 2-2 to specify which addresses should be read (Section 2.1.5 describes in detail how to use the memory configuration window).
Once used, data is displayed in the Flash Memory Data window as shown in Figure 2-5. This window can be selected in the View→Flash Memory Data pulldown menu. The Flash Memory Data viewer, shown in Figure 2-5, displays the code address on the left side, data in hex format in the central column, and the same data in ASCII format in the right column. The contents of the code viewer can be converted to TI (*.txt) or Intel (*.hex) file format by clicking on the "TI hex" or "INTEL" button.