SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
Ethernet PHY Configuration 3 - MR11 (EPHYCFG3)
Fields in this register are used to configure the Ethernet PHY. These configuration values are programmed by the system processor after a POR. The DONE bit in the EPHYCFG1 register is set when configuration is complete. This register is used when the user requires a configuration different from what is provided in the EMACPC register.
EPHYCFG3 is shown in Figure 15-100 and described in Table 15-112.
Return to Summary Table.
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
RESERVED | |||||||
R-0x0 | |||||||
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
POLSWAP | MDIMDIXS | RESERVED | FLDWNM | ||||
R/W-0x0 | R/W-0x0 | R-0x0 | R/W-0x0 | ||||