SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
To use a GPTM, the appropriate TIMERn bit must be set in the RCGCTIMER register (see Section 4.2.86). If using any CCP pins, the clock to the appropriate GPIO module must be enabled using the RCGCGPIO register (see Section 4.2.87). To find out which GPIO port to enable, see the device-specific data sheet. Configure the PMCn fields in the GPIOPCTL register to assign the CCP signals to the appropriate pins (see Section 17.5.22 and the device-specific data sheet).
This section shows module initialization and configuration examples for each of the supported timer modes.