SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
16/32-Bit General-Purpose Timer Peripheral Ready (PRTIMER)
The PRGPT32 register indicates whether the timer modules are ready to be accessed by software following a change in status of power, run mode clocking, or reset. A power change is initiated if the corresponding PCGPT32 bit is changed from 0 to 1. A run mode clocking change is initiated if the corresponding RCGCGPT32 bit is changed. A reset change is initiated if the corresponding SRGPT32 bit is changed from 0 to 1.
The PRGPT32 bit is cleared on any of the preceding events and is not set again until the module is completely powered, enabled, and internally reset.
PRTIMER is shown in Figure 4-176 and described in Table 4-204.
Return to Summary Table.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
RESERVED | |||||||||||||||
R-0x0 | |||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | R7 | R6 | R5 | R4 | R3 | R2 | R1 | R0 | |||||||
R-0x0 | R-0x0 | R-0x0 | R-0x0 | R-0x0 | R-0x0 | R-0x0 | R-0x0 | R-0x0 | |||||||