SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
Analog Comparator Software Reset (SRACMP)
The SRACMP register lets software reset the available analog comparator module.
A block is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRACMP bit to when the module is ready for use. Software should check the corresponding PRACMP bit to verify that the Analog Comparator module registers are ready to be accessed.
NOTE
Use this register to reset the analog comparator module.
SRACMP is shown in Figure 4-83 and described in Table 4-90.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||||||||||
| R-0x0 | |||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | R0 | ||||||||||||||
| R-0x0 | R/W-0x0 | ||||||||||||||