SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
EEPROM Software Reset (SREEPROM)
The SREEPROM register lets software reset the available EEPROM module.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SREEPROM bit to when the peripheral is ready for use. Software should check the corresponding PREEPROM bit to verify that the EEPROM module registers are ready to be accessed.
SREEPROM is shown in Figure 4-86 and described in Table 4-93.
Return to Summary Table.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
RESERVED | |||||||||||||||
R-0x0 | |||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | R0 | ||||||||||||||
R-0x0 | R/W-0x0 | ||||||||||||||