SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
General-Purpose Input/Output Software Reset (SRGPIO)
The SRGPIO register lets software reset the available GPIO modules.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRGPIO bit to when the peripheral is ready for use. Software should check the corresponding PRGPIO bit to verify that the GPIO module registers are ready to be accessed.
NOTE
Use this register to reset the GPIO modules.
SRGPIO is shown in Figure 4-72 and described in Table 4-79.
Return to Summary Table.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
RESERVED | R17 | R16 | |||||||||||||
R-0x0 | R/W-0x0 | R/W-0x0 | |||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
R15 | R14 | R13 | R12 | R11 | R10 | R9 | R8 | R7 | R6 | R5 | R4 | R3 | R2 | R1 | R0 |
R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 | R/W-0x0 |