SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
Hibernation Software Reset (SRHIB)
The SRHIB register lets software reset the available Hibernation module.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRHIB bit to when the peripheral is ready for use. Software should check the corresponding PRHIB bit to verify that the Hibernation module registers are ready to be accessed.
NOTE
Use this register to reset the Hibernation module.
SRHIB is shown in Figure 4-75 and described in Table 4-82.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||||||||||
| R-0x0 | |||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | R0 | ||||||||||||||
| R-0x0 | R/W-0x0 | ||||||||||||||