SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
LCD Controller Software Reset (SRLCD)
The SRLCD register lets software reset the available LCD module.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRLCD bit to when the peripheral is ready for use. Software should check the corresponding PRLCD bit to verify that the LCD module registers are ready to be accessed.
NOTE
Use this register to reset the LCD controller modules.
SRLCD is shown in Figure 4-88 and described in Table 4-95.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||||||||||
| R-0x0 | |||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | R0 | ||||||||||||||
| R-0x0 | R/W-0x0 | ||||||||||||||