SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
Universal Serial Bus Software Reset (SRUSB)
The SRUSB register lets software reset the available USB module.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRUSB bit to when the peripheral is ready for use. Software should check the corresponding PRUSB bit to verify that the USB module registers are ready to be accessed.
NOTE
Use this register to reset the USB module.
SRUSB is shown in Figure 4-79 and described in Table 4-86.
Return to Summary Table.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
RESERVED | |||||||||||||||
R-0x0 | |||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | R0 | ||||||||||||||
R-0x0 | R/W-0x0 | ||||||||||||||