SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
Watchdog Timer Software Reset (SRWD)
The SRWD register lets software reset the available watchdog modules.
A peripheral is reset by software using a simple 2-step process:
There may be latency from the clearing of the SRWD bit to when the peripheral is ready for use. Software should check the corresponding PRWD bit to verify that the Watchdog Timer module registers are ready to be accessed.
NOTE
Use this register to reset the watchdog modules.
SRWD is shown in Figure 4-70 and described in Table 4-77.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||||||||||
| R-0x0 | |||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | R1 | R0 | |||||||||||||
| R-0x0 | R/W-0x0 | R/W-0x0 | |||||||||||||