SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
USB Power (USBPOWER)
OTG A / Host
OTG B / Device
USBPOWER is an 8-bit register used for controlling SUSPEND and RESUME signaling and some basic operational aspects of the USB controller.
USBPOWER for OTG A / Host is shown in Figure 27-3 and described in Table 27-8.
USBPOWER for OTG B / Device is shown in Figure 27-4 and described in Table 27-9.
Return to Summary Table.
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | HSENAB | HSMODE | RESET | RESUME | SUSPEND | PWRDNPHY | |
R-0x2 | R/W-0x1 | R-0x0 | R/W-0x0 | R/W-0x0 | R/W1S-0x0 | R/W-0x0 | |
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
ISOUP | SOFTCONN | HSENAB | HSMODE | RESET | RESUME | SUSPEND | PWRDNPHY |
R/W-0x0 | R/W-0x0 | R/W-0x1 | R-0x0 | R-0x0 | R/W-0x0 | R-0x0 | R/W-0x0 |