SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
USB Transmit Hub Port Endpoint 0 (USBTXHUBPORT0), offset 0x083
USB Transmit Hub Port Endpoint 1 (USBTXHUBPORT1), offset 0x08B
USB Transmit Hub Port Endpoint 2 (USBTXHUBPORT2), offset 0x093
USB Transmit Hub Port Endpoint 3 (USBTXHUBPORT3), offset 0x09B
USB Transmit Hub Port Endpoint 4 (USBTXHUBPORT4), offset 0x0A3
USB Transmit Hub Port Endpoint 5 (USBTXHUBPORT5), offset 0x0AB
USB Transmit Hub Port Endpoint 6 (USBTXHUBPORT6), offset 0x0B3
USB Transmit Hub Port Endpoint 7 (USBTXHUBPORT7), offset 0x0BB
OTG A / Host
USBTXHUBPORTn is an 8-bit read/write register that, like USBTXHUBADDRn, only must be written when a full- or low-speed Device is connected to transmit endpoint EPn through a USB 2.0 hub. This register records the port of the USB 2.0 hub through which the target associated with the endpoint is accessed.
NOTE
USBTXHUBPORT0 is used for both receive and transmit for endpoint 0.
USBTXHUBPORTn is shown in Figure 27-35 and described in Table 27-40.
Return to Summary Table.
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RESERVED | PORT | ||||||
R-0x0 | R/W-0x0 | ||||||