米6体育平台手机版

SLAZ097Z October 2012 – May 2021 CC430F5147

1Functional Advisories
2Preprogrammed Software Advisories
3Debug Only Advisories
4Fixed by Compiler Advisories
5Nomenclature, Package Symbolization, and Revision Identification
6Advisory Descriptions
1. 6.1 ADC39
2. 6.2 ADC42
3. 6.3 ADC69
4. 6.4 AES1
5. 6.5 BSL7
6. 6.6 BSL14
7. 6.7 COMP10
8. 6.8 CPU21
9. 6.9 CPU22
10. 6.10 CPU36
11. 6.11 CPU40
12. 6.12 CPU46
13. 6.13 CPU47
14. 6.14 DMA4
15. 6.15 DMA7
16. 6.16 DMA10
17. 6.17 EEM17
18. 6.18 EEM19
19. 6.19 EEM23
20. 6.20 JTAG26
21. 6.21 JTAG27
22. 6.22 PMM11
23. 6.23 PMM12
24. 6.24 PMM14
25. 6.25 PMM15
26. 6.26 PMM18
27. 6.27 PMM20
28. 6.28 PMM26
29. 6.29 PORT15
30. 6.30 PORT19
31. 6.31 PORT29
32. 6.32 RF1A1
33. 6.33 RF1A2
34. 6.34 RF1A3
35. 6.35 RF1A5
36. 6.36 RF1A6
37. 6.37 RF1A8
38. 6.38 SYS12
39. 6.39 SYS16
40. 6.40 UCS11
41. 6.41 USCI26
42. 6.42 USCI30
43. 6.43 USCI34
44. 6.44 USCI35
45. 6.45 USCI39
46. 6.46 USCI40
7Revision History

6.17 EEM17

EEM Module

Function

Wrong Breakpoint halt after executing Flash Erase/Write instructions

Description

Hardware breakpoints or Conditional Address triggered breakpoints on instructions that follow Flash Erase/Write instructions, stops the debugger at the actual Flash Erase/Write instruction even though the flash erase/write operation has already been executed. The hardware/conditional address triggered breakpoints that are placed on either the next two single opcode instructions OR the next double opcode instruction that follows the Flash Erase/Write instruction are affected by this erratum.

Workaround

None. Use other conditional/advanced triggered breakpoints to halt the debugger right after Flash erase/write instructions.

Note: This erratum affects debug mode only.

6.17 EEM17

Category

Function

Description

Workaround