米6体育平台手机版

SLAZ097Z October 2012 – May 2021 CC430F5147

1Functional Advisories
2Preprogrammed Software Advisories
3Debug Only Advisories
4Fixed by Compiler Advisories
5Nomenclature, Package Symbolization, and Revision Identification
6Advisory Descriptions
1. 6.1 ADC39
2. 6.2 ADC42
3. 6.3 ADC69
4. 6.4 AES1
5. 6.5 BSL7
6. 6.6 BSL14
7. 6.7 COMP10
8. 6.8 CPU21
9. 6.9 CPU22
10. 6.10 CPU36
11. 6.11 CPU40
12. 6.12 CPU46
13. 6.13 CPU47
14. 6.14 DMA4
15. 6.15 DMA7
16. 6.16 DMA10
17. 6.17 EEM17
18. 6.18 EEM19
19. 6.19 EEM23
20. 6.20 JTAG26
21. 6.21 JTAG27
22. 6.22 PMM11
23. 6.23 PMM12
24. 6.24 PMM14
25. 6.25 PMM15
26. 6.26 PMM18
27. 6.27 PMM20
28. 6.28 PMM26
29. 6.29 PORT15
30. 6.30 PORT19
31. 6.31 PORT29
32. 6.32 RF1A1
33. 6.33 RF1A2
34. 6.34 RF1A3
35. 6.35 RF1A5
36. 6.36 RF1A6
37. 6.37 RF1A8
38. 6.38 SYS12
39. 6.39 SYS16
40. 6.40 UCS11
41. 6.41 USCI26
42. 6.42 USCI30
43. 6.43 USCI34
44. 6.44 USCI35
45. 6.45 USCI39
46. 6.46 USCI40
7Revision History

6.21 JTAG27

JTAG Module

Function

Unintentional code execution after programming via JTAG/SBW

Description

The device can unintentionally start executing code from uninitialized RAM addresses 0x0006 or 0x0008 after being programming via the JTAG or SBW interface. This can result in unpredictable behavior depending on the contents of the address location.

Workaround

1. If using programming tools purchased from TI (MSP-FET, LaunchPad), update to CCS version 6.1.3 later or IAR version 6.30 or later to resolve the issue.

2. If using the MSP-GANG Production Programmer, use v1.2.3.0 or later.

3. For custom programming solutions refer to the specification on MSP430 Programming Via the JTAG Interface User's Guide (SLAU320) revision V or newer and use MSPDebugStack v3.7.0.12 or later.

For MSPDebugStack (MSP430.DLL) in CCS or IAR, download the latest version of the development environment or the latest version of the MSPDebugStack

NOTE: This only affects debug mode.'

6.21 JTAG27

Category

Function

Description

Workaround