米6体育平台手机版

SLAZ618AA August 2014 – August 2021 MSP430FR69271

1
2
3
4
5
1. 6
2. 7
  1. 8
  2. 9
3. 10
11
1. 12
2. 13
3. 14
4. 15
5. 16
6. 17
7. 18
8. 19
9. 20
10. 21
11. 22
12. 23
13. 24
14. 25
15. 26
16. 27
17. 28
18. 29
19. 30
20. 31
21. 32
22. 33
23. 34
24. 35
25. 36
26. 37
27. 38
28. 39
29. 40
30. 41
31. 42
32. 43
33. 44
34. 45
35. 46
36. 47
37. 48
38. 49
39. 50
40. 51
41. 52
42. 53
43. 54
44. 55
45. 56
46. 57
47. 58
59

6.11 COMP10

COMP Module

Function

Comparator port output toggles when entering or leaving LPM3/LPM4

Description

The comparator port pin output (CECTL1.CEOUT) erroneously toggles when device enters or leaves LPM3/LPM4 modes under the following conditions:

1) Comparator is disabled (CECTL1.CEON = 0)

AND

2) Output polarity is enabled (CECTL1.CEOUTPOL = 1)

AND

3) The port pin is configured to have CEOUT functionality.

For example, if the CEOUT pin is high when the device is in Active Mode, CEOUT pin becomes low when the device enters LPM3/LPM4 modes.

Workaround

When the comparator is disabled, ensure at least one of the following:

1) Output inversion is disabled (CECTL.CEOUTPOL = 0)

OR

2) Change pin configuration from CEOUT to GPIO with output low.

6.11 COMP10

Category

Function

Description

Workaround