SLLU355 October 2022 TCAN1046A-Q1 , TCAN1046AV-Q1
Table 1-1 lists the jumper connections for the EVM.
| Connection | Type | Description |
|---|---|---|
| J1 | SOIC Socket | Removable socket adapter sized for 14-pin SOIC package type. |
| J2 | SOIC Socket |
Removable socket adapter sized for 14-pin SOIC package type. |
| J3 | 6-pin header |
Used to monitor CANH1 and CANL1 on TCAN1046A CAN1 bus, GND connections available as well. |
| J4 | 2-pin jumper | Used to place R5 (120-Ω ) on the TCAN1046A CAN1 bus. Use in combination with J5 to represent the combined 60-Ω CAN termination. |
| J5 | 2-pin jumper | Used to place R4 (120-Ω ) on the TCAN1046A CAN1 bus. Use in combination with J4 to represent the combined 60-Ω CAN termination. |
| J6 | 2-pin header | VCC and GND connections for TCAN1046A. |
| J7 | 2-pin jumper |
Used to place R14 (120-Ω ) on the TCAN1046A CAN2 bus. Use in combination with J9 to represent the combined 60-Ω CAN termination. |
| J8 | 6-pin header | Used to monitor CANH2 and CANL2 on TCAN1046A CAN2 bus, GND connections available as well. |
| J9 | 2-pin jumper | Used to place R13 (120-Ω ) on the TCAN1046A CAN2 bus. Use in combination with J7 to represent the combined 60-Ω CAN termination. |
| J10 | GND rail | Ground rail connection |
| J11 | 12-pin header | Connections for VCC, TXD, and RXD for both CAN interfaces available, as well as GND connections. |
| J12 |
2-pin jumper |
Used to apply either VCC or GND to Standby 1 (pin 14). |
| J13 |
2-pin jumper |
Used to apply either VCC or GND to Standby 2 (pin 11). |
| J14 |
6-pin header |
Used to monitor CANH1 and CANL1 on TCAN1046AV CAN1 bus, GND connections available as well. |
| J15 |
2-pin jumper |
Used to place R35 (120-Ω ) on the TCAN1046AV CAN1 bus. Use in combination with J16 to represent the combined 60-Ω CAN termination. |
| J16 |
2-pin jumper |
Used to place R33 (120-Ω ) on the TCAN1046AV CAN1 bus. Use in combination with J15 to represent the combined 60-Ω CAN termination. |
| J17 |
2-pin header |
VIO logic supply and GND connections for TCAN1046AV. |
| J18 |
2-pin jumper |
Used to place R43 (120-Ω ) on the TCAN1046AV CAN2 bus. Use in combination with J20 to represent the combined 60-Ω CAN termination. |
| J19 |
6-pin header |
Used to monitor CANH2 and CANL2 on TCAN1046AV CAN2 bus, GND connections available as well. |
| J20 |
2-pin jumper |
Used to place R42 (120-Ω ) on the TCAN1046AV CAN2 bus. Use in combination with J18 to represent the combined 60-Ω CAN termination. |
| J21 |
2-pin header |
VCC supply and GND connections for TCAN1046AV. |
| J22 |
12-pin header |
Connections for VCC, VIO, TXD, and RXD for both CAN interfaces available, as well as GND connections. |
| J23 |
GND rail |
Ground rail connection |
| J24 |
2-pin jumper |
Used to apply either VIO or GND to Standby 1 (pin 14). |
| J25 | 2-pin jumper | Used to apply either VIO or GND to Standby 2 (pin 8). |
| TP1 | Test Point | TCAN1046A CANH (CAN1) |
| TP2 | TCAN1046A CANL (CAN1) via 330-Ω series resistor. | |
| TP3 | TCAN1046A VCC | |
| TP4 | TCAN1046A CANH (CAN1) via 330-Ω series resistor. | |
| TP5 | TCAN1046A CANL (CAN1) | |
| TP6 | TCAN1046A GND | |
| TP7 | TCAN1046A CANH (CAN2) | |
| TP8 | TCAN1046A CANL (CAN2) via 330-Ω series resistor. | |
| TP9 | TCAN1046A CANH (CAN2) via 330-Ω series resistor. | |
| TP10 | TCAN1046A Standby (CAN1) | |
| TP11 | TCAN1046A CANL (CAN2) | |
| TP12 | TCAN1046A Standby (CAN2) | |
| TP13 | TCAN1046A TXD (CAN1) | |
| TP14 | TCAN1046A TXD (CAN2) | |
| TP15 | TCAN1046A RXD (CAN1) | |
| TP16 | TCAN1046A RXD (CAN2) | |
| TP17 | TCAN1046AV CANH (CAN1) | |
| TP18 | TCAN1046AV VIO logic supply | |
| TP19 | TCAN1046AV CANL (CAN1) via 330-Ω series resistor. | |
| TP20 | TCAN1046AV CANH (CAN1) via 330-Ω series resistor. | |
| TP21 | TCAN1046AV CANL (CAN1) | |
| TP22 | TCAN1046AV GND | |
| TP23 | TCAN1046AV CANH (CAN2) | |
| TP24 | TCAN1046AV CANL (CAN2) via 330-Ω series resistor. | |
| TP25 | TCAN1046AV VCC | |
| TP26 | TCAN1046AV CANH (CAN2) via 330-Ω series resistor. | |
| TP27 | TCAN1046AV CANL (CAN2) | |
| TP28 | TCAN1046AV GND | |
| TP29 | TCAN1046AV TXD (CAN1) | |
| TP30 | TCAN1046AV RXD (CAN1) | |
| TP31 | TCAN1046AV TXD (CAN2) | |
| TP32 | TCAN1046AV Standby (CAN2) | |
| TP33 | TCAN1046AV Standby (CAN1) | |
| TP34 | TCAN1046AV RXD (CAN2) |