SLLU355 October 2022 TCAN1046A-Q1 , TCAN1046AV-Q1
For the TCAN1046A footprint, pins 11 and 14 of the device are the STBY inputs. These pins control the state of the transceiver. STBY1 is routed to J12 or TP10. J12 allows the selection of VCC or GND to connect to the STBY1 pin, while TP10 is just for observation. STBY2 is routed to J13 or TP12. J13 allows the selection of VCC or GND to connect to the STBY2 pin, while TP12 is just for observation.
For the TCAN1046AV footprint, pins 8 and 14 of the device are the STBY inputs. These pins control the state of the transceiver. STBY1 is routed to J24 or TP33. J24 allows the selection of VCC or GND to connect to the STBY1 pin, while TP33 is just for observation. STBY2 is routed to J25 or TP32. J25 allows the selection of VCC or GND to connect to the STBY2 pin, while TP32 is just for observation.