SLLU389 October   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Setup
    2. 2.2 TUSB1064-Q1 Equalization Control
  9. 3Software
    1. 3.1 Firmware Description
    2. 3.2 GUI Installation
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks

2.1 Setup

Table 2-1 lists the headers provided for the configuration of the TUSB1064 by default. The configuration settings must be optimized depending on the amount of loss of each channel in the system. The EVM is configured to GPIO mode by default. For an I2C configuration, the user must change the JMP7 (I2C_EN) shunt.

Table 2-1 TUSB1064-Q1 EVM Configuration Pins
DesignatorJumper ControlDefault Configuration
JMP1Downstream EQ1Shunt on pin 3 - 4 (R)
JMP2Downstream EQ0Shunt on pin 3 - 4 (R)
JMP3Upstream SSEQ1Shunt on pin 3 - 4 (R)
JMP4Upstream SSEQ0Shunt on pin 3 - 4 (R)
JMP5DP EQ1Shunt on pin 5 - 6 (0)
JMP6DP EQ0Shunt on pin 1 - 2 (1)
JMP7I2C_ENShunt on pin 5 - 6 (0)
J1FLIPNo Shunt
J2CTL0No Shunt
J3CTL1No Shunt
J4ENShunt on pin 1 - 2 (VCC)
J5POWERVBUS → VBUS_DS
J10VCCShunt
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |