5.2.2 Target

After receiving commands from the initiator, the transceiver must be modified when the anticollision process is started:

1. ISO Control register (0x01) → 0x22 (NFC-F at 212 kbps, receive with CRC).
2. Send packet:
   1. Reset FIFO (0x0F) direct command.
   2. Transmission with CRC direct command (0x11).
   3. TX Length Byte 1 and 2 (0x1D and 0x1E) registers.
   4. Write the response to the FIFO.

Step 2 must be used to send commands to the passive target.