Table 4-3 JP1 Options for PWM InputJP1 | PWM Source |
---|
Shorted | MSP430 |
Open | External PWM using PWM test point |
To control the DRV2625 using PWM, follow the instructions below:
- Enter Additional Hardware Modes.
- Select Mode 2 (00010'b) using the increment mode button (+).
- B1 – Disable Amplifier
- B2 – ERM Mode
- B3 – LRA Mode
- B4 – No function
- Choose either the on-board ERM or LRA using buttons B1 or B2.
- Apply the PWM signal to the PWM test point at the top of the board.